User Manual

The Sequence tab in the Maestro Control Center.
The Sequence tab allows simple motion sequences to be created and played back on the Maestro.
A sequence is simply a list of “frames” specifying the positions of each of the servos and a duration
(in milliseconds) for each frame. Sequences are stored in the registry of the computer where the
sequence was created. Sequences can be copied to the script, which is saved on the Maestro.
Sequences can also be exported to another computer via a saved settings file.
To begin creating a sequence, click the New Sequence button and enter a name for the sequence.
Using the controls in the Status tab, set each of the servos to the position you would like for the first
frame, then click Save Frame at the bottom of the window. Repeat to create several frames, then
switch back to the Sequence tab. You can now play back the sequence using the “Play Sequence”
button, or you can set the servos to the positions of the specific frame by clicking the Load Frame
button.
The Frame properties… button allows you to set the duration and name of a frame.
Pololu Maestro Servo Controller User’s Guide © 2001–2019 Pololu Corporation
4. Using the Maestro Control Center Page 35 of 102