User Manual

Windows 7 device manager showing the Micro Maestro 6-channel USB servo controller.
Windows XP device manager showing the Micro Maestro 6-channel
USB servo controller.
COM ports
After installing the drivers, if you go to your computer’s Device Manager and expand the “Ports (COM
& LPT)” list, you should see two COM ports for the Maestro: the Command Port and the TTL Port. In
parentheses after these names, you will see the name of the port (e.g. “COM5” or “COM6”).
You might see that the COM ports are named “USB Serial Device” in the Device Manager instead of
Pololu Maestro Servo Controller User’s Guide © 2001–2019 Pololu Corporation
3. Getting Started Page 25 of 102