User Manual

Micro Maestro 6-channel USB servo controller

(fully assembled) labeled top view.

Note: This section applies to the Micro Maestro servo controller. Please see Section

1.b for Mini Maestro pinout and component information.

The Pololu Micro Maestro 6-channel servo controller can connect to a computer’s USB port via a

USB A to mini-B cable [https://www.pololu.com/product/130] (not included). The USB connection is used

to configure the servo controller. It can also be used to send commands to the servo controller, get

information about the servo controller’s current state, and send and receive TTL serial bytes on the

TX and RX lines.

1. Overview Page 10 of 99