Operation Manual

41
RX Power saving
Press [ ] key, use [ ] / [ ] key to select menu 18, LCD displays
“RX.SAV”. Press[ ] key to enter the setting, through [ ] / [ ] key to
choose“ON”/“OFF”,conrmby[
] key, press [ ] key to exit.
If select “ON”, there is an “S” displays at the top of LCD. If select “OFF”,
RX power saving function isn’t available.
Scan mode setting
Press [ ] key, use [ ] / [ ] key to select menu 19, LCD displays
“SCAN.S/TIME”. Press[ ] key to enter scan mode setting, through [ ] /
[
]keytochoose“TIME”,“CARRY”,“SEEK”threemodes,conrmby[
]
key, press [ ] key to exit.
If select “TIME”, it is time scan,
If select “CARRY”, it is carrier wave scan.
If select “SEEK”, it is time exactly scan, including carrier wave, signaling.
Auto keypad lock
Press [ ] key, use [ ] key to select menu 20, LCD displays “AUTOLK/
OFF”. Press[ ] key to enter the setting, through [ ] / [ ] key to choo-
se“ON”/“OFF”,conrmby[
] key, press [ ] key to exit. If select “ON”,
keypad will be auto locked when there is without any operation.
Voice prompt ON/OFF
Press [ ] key, use [ ] key to select menu 21, LCD displays “VOICE/
OFF”. Press [ ] key to enter the setting, through [ ] key to choose “ON”
/“OFF”,conrmby[
] key, press [ ] key to exit.
If select “ON”, voice prompt function is available.
If select “OFF”, voice prompt function is unavailable.