User Guide

Thank you for your Polk purchase. If you have a question
or comment, please feel free to call or email us.
Technical Assistance
In North America, call Polk Customer Service at
800-377-POLK(7655) (M–F, 9 a.m.–5:30 p.m. EST)
Outside the US, call [phone]
Email: [e-mail]
Polk Audio
1 Viper Way
Vista, CA 92081
The complete owner’s manual can be found online
at www.polkaudio.com
What’s in the Box
Sound bar
Remote control
Battery
Sound bar power cord
Subwoofer power cord
Literature
Subwoofer
HDMI cable
电视音音
󰂡控制
电
电视音音电󰂟
电
低音电󰂟
󰀮󰇏
低音炮
AAA
Quick Start Guide
Spacers
隔
Optical cable

Connecting Your Signa S2 to Your TV
1. Is an HDMI port on your TV labeled “ARC”?
TV
ARC
HDMI
YES
是
没有
Connect the included HDMI cable to the HDMI ports labeled
with “ARC” on both the TV and the sound bar.
Connect the an Optical cable between the TV and sound bar.
Connect the included HDMI cable to any available HDMI port
on the TV and to the “TV ARC” port on the sound bar.
NOTE: HDMI (ARC) and optical supports Dolby 5.1 decoding.
2. Remote battery installation:
Insert the provided AAA battery.
3. Connect the sound bar power cord to an AC outlet
4. Position subwoofer and connect to an AC outlet
(for best performance place on the same wall as the TV)
TV
NOTE: The Signa S2 sound bar and wireless subwoofer are
preset at the factory to work together. Should your wireless
subwoofer stop receiving an audio signal, follow these
instructions to re-establish the connection:
1. Turn on your sound bar.
2. Press and hold the BAR SYNC button on the back of the
subwoofer for 3 seconds.
3. Simultaneously press and hold Bluetooth and VOL +
buttons on the sound bar for 5 seconds.
The sound bar will search for a connection while the first and
second LEDs on the sound bar will flash intermittently. The
lights will stop flashing when the sound bar and subwoofer
connect. If the sound bar and subwoofer fail to connect, the
first and second LEDs will flash together 5 times. Repeat steps
above to establish a connection.
5. Turn on your sound bar
Press the Power button on the sound bar or remote.
NOTE: Make sure TV internal speakers are off
TV
OPTICAL
HDMI
NO
是
没有
In all other countries, please refer to
[e-mail]