Reference Theater s LCi-RTS105 Owner manual

www
.PolkAudio.com
/ 800.377.7655 (USA & Canada) / 410.358.3600 (W
orldwide)
3
Specifications
LC
i-RTS105
Installed Weight: 12.5 lbs. (5.7 kg)
(not including Stud-Lock Mounting System
™
)
PERFORMANCE
POWER HANDLING (W
ATTS/CHANNEL) 10-250 CONTINUOUS
IMPEDANCE (NOMINAL) 4 OHMS
FREQUENCY RESPONSE (OVERALL)
50HZ – 27KHZ
THX SPEC 80HZ-26KHZ
EFFICIENCY (2.83V@1M)
92
dB
SPEAKER WEIGHT (INST
ALLED) 12.5 LBS (5.7KG)
DRIVER COMPLEMENT
MIDBASS 2-5 1/4" (13.34CM)
AERATED POLYPROPYLENE
DYNAMIC BALANCE
™
DRIVERS
TWEETER 1-1" (2.54CM)
AIMABLE RING RADIATOR TWEETER
CONNECTIONS
SPEAKER WIRE
MAXIMUM WIRE SIZE ACCOMMODATED 12 AWG
MINIMUM RECOMMENDED 18 AWG
INPUT CONNECTORS HEAVY-DUTY SPRING LOADED
PUSH TERMINALS
PERFORMANCE
POWER HANDLING (W
ATTS/CHANNEL) 10-200 CONTINUOUS
IMPEDANCE (NOMINAL) 4 OHMS
FREQUENCY RESPONSE (OVERALL) 50HZ – 27KHZ
THX SPEC 80HZ-26KHZ
EFFICIENCY (2.83V@1M) 92dB
SPEAKER WEIGHT (INST
ALLED) 13 LBS (5.9KG)
DRIVER COMPLEMENT
MIDBASS 2-5 1/4" (13.34CM)
AERATED POLYPROPYLENE
DYNAMIC BALANCE
™
DRIVERS
TWEETER 1-1" (2.54CM)
RING RADIATOR TWEETER
CONNECTIONS
SPEAKER WIRE
MAXIMUM WIRE SIZE ACCOMMODATED 12 AWG
MINIMUM RECOMMENDED 18 AWG
INPUT CONNECTORS HEAVY-DUTY SPRING LOADED
PUSH TERMINALS
Specifications
LC
i-RTS100
Installed Weight: 13 lbs. (5.9 kg)
(not including Stud-Lock Mounting System
™
)
2 Polk Audio Custom Install Pr
oduct: Model Number
RTS100 Dimensions
Overall Diameter 14" (35.56cm)
Cutout Diameter 12 1/2" (31.75cm)
Mounting Depth 8 3/4" (22.23cm)
Overall Depth 10 13/64" (25.9cm)
Available Finish: Paintable White
Hardware (included)
• One LCi-RTS100 speaker
• Speaker mounting template
• Paint mask
• Two grills (one perforated, one cloth)
• Eye Bolt
• Logo Badge
•LC
i-RTS100 Manual
• Registration Card
Impor
tant Note:
If anything is missing or damaged, or if
your LCi-RTS100 speaker fails to operate, notify Polk Audio
Installer Support Services immediately at 800-377-7655.
TWEETER
NORM. CUT
WALL DIST.
>60cm
<60cm
>2 <2
Cutout Diameter
12 1/2" (31.75cm)
Depth measured
from the back of the
enclosure to the
back of the baffle
8 3/4" (22.23cm)
Important Note: The RTS100 comes with an eye-bolt,
which must be installed before locating the speaker in
a ceiling when additional support is desired. Use an
appropriate length and weight of wire when installing
an RTS100 in a ceiling.
45°
Angled baffle geometry ensures
directed imaging to the listening area.
Web Address:
For more information on the LCi-RTS105, log onto
http://www.polkaudio.com/downloads/manuals/
home/LCi-RTS105_manual.pdf
Web Address:
For more information on the LCi-RTS100, log onto
http://www.polkaudio.com/downloads/manuals/
home/LCi-RTS100_manual.pdf