Owner's Manual

PAINTING THE CABINET, BRACKET
KNOBS AND BRACKET:
1. Apply two thin coats of primcr Lo the
cabinet and knobs. The bracket does not
require a primer.
2. Whcn the primer is completcly dry, apply
the finish color [figure 9J.
3. When the paint is completcly dry, remove
the masking material.
4. Do not reattach the speaker to the bracket
until·
the bracket is mounted. Try to keep
all handling of freshly painted parts to
a minimum.
FIGURE 9
After priming, apply thin coats of finish color
Despues
de aplicar 10 capo de imprimacicm (primer),
aplique capas delgadas del color del acabodo.
Suite Ii 10 couche d'appret, appliquez 10
peinture de linition en couches minces.
Nach
der Grundierung tragen Sie eine
diinne Schicht
des Forbanstrichs auf.
PAINTING THE GRILLE:
1. The grille of the Atrium speaker features
an even, protective powder coating.
This powder coating is an ideal primer.
The grille features an engraved logo pod.
You can mask this off or paint right over it.
2. Using spray paint, spray two thin coats of
finish color with no primer [figure 10]. If
you'rc using a compressor and spray gun,
use the finest, most diffuse seLLing. Be
careful not to fill the holes in the grille
with paint.
3. When the paint is completely dry, carefully
fit
the grille into its recess so that it is just
resting
on the cabinet. Starting with one
corner, go around thc speaker and push
the grille into the grille notch a little bit at
a time. Bc gen tle; the grille may be easily
bcnt out of shape by rough handling.
FIGURE 10
Paint the grille. Use thin coats of spray paint.
Do not block grille holes with paint.
Pinte 10 rejillo. Use capas delgados de pinh/ro aerosol.
No tape los agujeras de 10 reiilla can pintura.
Peinturez
10 grille. Appliquez des couches minces de peinture
aerasol. N'obstruez pas les traus de 10 grille de peinture.
Streichen Sie den Gitterauf.otz. Verwenden Sie dozu diinne
Sprilz/Qckschichten. Die OHnungen
de. GitterQufsalzes diirfen
nicht mit Forbe blockiert werden.
For Customer Service, call 800-377-7655. 5