Owner's Manual

ENGLISH
SPECIFICA nONS
PA200.4 PA500.4
PA11DO.5
80W x4 200W x 4 200W x 4 @2 Ohms
Dynamic Power Rating
@2 Ohms @2 Ohms
1200W x 1@1 Ohm
RMS Continuous Power
250W x 2
1
DOW x 2 250W x 2
Bridged @4 Ohms
600W x 1@1 Ohm
RMS Continuous Power
125W x 4
50W x4 125W x 4
@2
Ohms
2
600W x 1@ 1 Ohm
RMS Continuous Power
80W x4
35W x 4 90W x4
@4
Ohms!
280W xl
Conversion Efficiency
>66% @4 ohms >66% @4 ohms
Frequency Response 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz
Signal to Noise Ratio >90dBA
>98dBA
>98dBA
Separation
65db @1 kHz 65db @1 kHz 65db @1 kHz
Damping Factor
>100 >150
>150
(>50 sub channel)
Crossover Type/Range
Switchable
2-way Butterworth
2-way Butterworth
high or low pass 50 to 500Hz
50 to 500Hz
Crossover Slope 12dB/octave 12dB/octave 12dB/octave
Bass Equalization
+8dB, centered
o to +8dB
o to +8dB
@40Hz
Subsonic Filter Variable
RCA Input/Output Jacks
2-channel in/2-channel
paralleled full range out
Input Impedance 20K ohms 20K ohms 20K ohms
Input Sensitivity
Variable from
Variable from
Variable from
250mV to 7.5V 250mV to 8V
250mV to 8V
Supply Voltage 10-16VDC 10-16VDC
10-16VDC
FusingfType 1x 30A 2x 40A
3 x 40A
Minimum Cable Required
#10 #8 #8
Port Output (Optional Fan)
12V @ <200mA
12V@ <200mA
LED(Optional)
12V @ <200mA
1 RMS continuous power driven into 4 Ohms from 20 to 20,000 Hz @ 14.4VOC with less than 0.08% THO+N.
2 RMS continuous power driven into 2 Ohms from 20 to 20,000 Hz @ 14.4VOC with less than 0.15% THO+N
www. POL K A U D I 0 . COM / AMP S 17