ASSEMBLY INSTRUCTION 9PCS Patio Dining Set WF300001, WF300002 Page: 1/11
X1 A A C C B X4 X4 G L D F J M I L I E K H Note: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screw with tools gradually. 4. If screw are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5.
CARTON CONTENT: WF300001 A x2 H x4 L x8 B x1 C x2 I x4 J x4 K x4 Hardware M x4 WF300002 D x4 G x4 E x4 F x4 I x4 Page: 3/11
Part List: A x2 B x1 Top Table E x4 Leg Table Arm Left Chair Behind Chair Seat Stool Arm Right Chair H x4 Back Chair Seat Chair L x8 K x4 J x4 Leg Stool Side Leg Table G x4 F x4 I x8 D x4 C x2 Support Stool Chair Cushion M x4 Seat Stool Cushion Hardware List: 1 x 36 pcs Extra 2 pcs 2 x 16 pcs Extra 2 pcs 3 x 36 pcs BOLT M6 x 20MM BOLT M6 x 30MM BOLT M6 x 40MM BOLT M6 x 55MM 6 x 2 pcs 7 x 2 pcs 8 x 1 pcs Nut M6 ALLEN KEY KEY 5 x 100 pcs WASHER M6 Extra 2 pcs 4 x 2 pc
STEP 1 50% F x1 E x1 3 x2 5 x2 E F 5 3 X2 Bolt Connect The Arm Right Chair (E) & Behind Chair (F), tighten Bolt (3), Flat Washer (5) with Allen Key (7). STEP 2 G x1 G Connect The Part from STEP 1 & Back Chair (G).
STEP 3 50% D x1 3 x2 5 x2 D X2 Bolt Connect The Part from STEP 2 & Arm Right Chair (D), tighten Bolt (3), Flat Washer (5) with Allen Key (7). STEP 4 H x1 1 x2 3 x5 5 x7 50% H 5 1 X2 Bolt 3 5 X5 Bolt Connect The Part from STEP 3 & Seat Chair (H), tighten Bolt (1),(3), Flat Washer (5) with Allen Key (7).
STEP 5 100% Put the Chair upright and make sure all legs are level, then firmly tighten Bolts with Allen Key (7) STEP 6 L x2 L L Put on Chair Cushion (L) to finishChair.
STEP 8 STEP 7 J x1 I x1 2 x4 5 x4 2 50% 5 50% K x1 1 x4 5 x4 1 K X2 Bolt X4 Bolt I I 5 J Connect The Seat Stool (J) & Leg Stool (I), tighten Bolt (2), Flat Washer (5) with Allen Key (7) Connect The Part from STEP 7 & Support Stool (K), tighten Bolt (1), Flat Washer (5) with Allen Key (7). STEP 9 STEP 10 100% M Put the Stool upright and make sure Put on Seat Stool Cushion (M) & all legs are level, then firmly tighten to finish Stool.
STEP 11 50% A x2 4 x2 5 x4 6 x2 A A 5 4 6 5 X2 Bolt Connect The two Top Table (A), tighten Bolt (5), Flat Washer (5), Nut (6) with Allen Key (7), Key (8). STEP 12 B x1 1 x4 5 x4 50% B 1 1 5 5 X4 Bolt Connect The Part from STEP 11 & Leg Table (B), tighten Bolt (1), Flat Washer (5) with Allen Key (7).
STEP 13 C x1 1 x4 5 x4 50% C 5 1 1 5 Connect The Part from Step 12 & Side leg Table (C), tighten Bolt (1), Flat Washer (5) with Allen Key (7). STEP 14 C x1 1 x4 5 x4 50% C 5 1 1 5 Connect The Part from STEP 13 & Side Leg Table (C), tighten Bolt (1), Flat Washer (5) with Allen Key (7).
STEP 15 100% Put the Table upright and make sure all legs are level, then firmly tighten Bolts with Allen Key (7) Finish Page: 11/11
