ASSEMBLY INSTRUCTION SKU:WF289445+WF289446 If you have any questions about the product, please contact the email: Polibihd@outlook.
Detail View 1 x1 2 x2 3 x1 6 x2 8 5 x2 2 7 x1 6 8 5 8 4 x1 8 x4 10 x1 9 x1 11 -1 12 x2 13 x1 12 11 -2 14 x24
Part List WF289445 1 2 3 Head board-1pc Side head board-2pcs Under board-1pc 4 6 7 Foot board-1pc Gas lift-2pcs Cross bar-1pc 9 Stopper-1pc 11 -1 Metal frame cross bar-1pc 14 Slat-24pcs Hardware List+WF289446 5 8 Side rails-2pcs Legs-4pcs 11 -2 Metal frame cross bar-1pc 12 Metal frame side bar-2pcs 10 Black non-woven fabric-1pc 13 Metal frame middle bar-1pc
Hardware List A B C 20*70mm Allen Key(1PC) Connecting square iron(2pcs) Bolts(24PCS) D 2*100*100mm Ø8*25mm E F 80*35*35mm "7"Connector(4pcs) Ø8*45mm H G Ø22 Washer(12pcs) J I Ø4*50mm Color controller(1pc) Nails(4pcs) K Ø6*30mm Bolts(10pcs) L Poly support(4pcs) N 40*340mm Pull tab(1pc) O Ø12mm Nuts(2pcs) P 70*23mm R 25*25*180mm Middle legs(2pcs) T S 55*27*11mm End slats cap(24pcs) V Ø12mm Ø15mm Nuts(8pcs) Q Spanner(1pc) 43*33mm Ø4*25mm Nails(12pcs) M Nuts(6pcs) Bolts(14P
Attention: Do not tighten the screws before completing the entire installation. If you have any difficulty with the installation process, please feel free to contact us. Step 1 x2 Fix the Side head board 2 to the Siderails 5 with Bolts B and Connecting square iron C by using Allen key A. B C A A Allen Key x1 B Bolts x 8 C Connecting square iron x 2 M8X25mm Step 2 Fix the Side head board 2 to the Under board 3 with Bolts B and "7" Connector D by using Allen key A.
Step 4 Fix the Head board 1 to the Side head board 2 with Bolts F and Washer G by using Allen key A. G F F Bolts x 4 G Washer x 4 M8X45mm Step 5 Stick the Black non-woven fabric 8 to the bottom of bed. Step 6 Fix the legs 11 with Nails H by using Electric drill or Screw driller.
Step 7 Fix the Cross bar 7 to the Siderails 5 with Bolts J by using Electric drill or Screw driver. J J Bolts x 2 M6X30mm Step 8 Fix the Poly support L to the Siderails 5 and Foot board 4 with Nails K by using Electric drill or Screw driver. L K K Nails x 12 L Poly support x 4 M4X25mm Step 9 Fix the Gas lift 6 to the Siderails 5 with Bolts J by using Electric drill.Fix the Gas bar to the Gas lift 6 with Nuts N.
Step 10 Assemble the slat frame with Blots F,Washer G and Nuts O by using Spanner P. F G O F Bolts x 8 P O Nuts x 8 G Washer x 8 P Spanner x 1 Allen Key M8X45mm O F G Step 11 Fix the Middle legs Q to the Middle bar with Blots F by using Allen key A.Put the Pull tab M in the end of the slat frame. F Q F Bolts x 2 Q Middle legs x 2 M Pull tab x 1 M8X45mm M Step 12 Assemble the slats in to the assembled slats frame with Single slat caps S and Double slat caps R.
Step 13 Assemble the slats frame 10 to the gas lift 6 with Bolts T,Washer U and Nuts V.Fix the Color Controller I to the light line,Fix the Adapter E to the Color controller I. Put the Stopper on the slat frame,then assembly is finished.Now please tighten all hardware and enjoy the bed.
