User manual

Polaroid PROZ500PR003
18
keyboard will be locked.
5. Change Password
To prevent unauthorized operation and use. Enter submenu “Change Password”
to change phone password.
Note: the new password must be longer than four digits but shorter than
eight digits. The default password is 1122.
7.5 Connectivity
You can select the Bluetooth and data account.
Bluetooth
You may connect the phone to other devices through Bluetooth. The phone is
able to build a wireless connection within the range of ten meters.
Since the signal is transmitted by radio wave, you phone does not need to
face the other devices. However, wireless Bluetooth connections could be
interfered by walls or other electronic devices. In certain areas, Bluetooth
might be restricted. Please contact the supervising department or service
provider for more information.
Note: using the Bluetooth (or running it in back stage) will consume more
battery power and shorten battery life.
In the Bluetooth submenu including the following submenus, you may set up
relevant Bluetooth service.
• Activate Bluetooth: press OK key to start/close the Bluetooth function;
• Search handfree device: press OK key to search the handfree device
such as Bluetooth earphone etc.; if an activated Bluetooth device is nearby,
the phone will nd the device, press OK key to connect, input Bluetooth code
to match and connect.
• My device: press OK key to enter My device, view the linked devices
history list; Select a record, press OK key to operate:
Connect: connect the device, you may choose a service in service record
to connect.
Disconnect: disconnect the device.
Set as handfree earphone: set the earphone as current default earphone.
Device name: rename the device.
Delete: delete the selected record.
Delete all: delete all records.
Service list: view the service record of the device.
Search new device: search for new Bluetooth devices.
• Connected device: view connected devices and their services, press OK
key to disconnect the device.
• Settings
Phone can be searched: press OK key to turn on/off the function.
Phone device name: select an input method to rename the devices.
Access approval: press OK key to turn on/off the function; turn on to allow