Operation Manual Plasma Monitor PLA-4255BD

38
Troubleshooting
Problem Possible Solution
˙No picture.
Can not see video at VIDEO 1,2,3 • Select source again.
Cannot receive any channels. • Make sure the power cord is connected
securely.
• Turn on the power of the PDP.
• Check antenna/cable connections.
______________________________________________________________
˙TV is locked to one channel. • Perform Auto Program to add receivable
channels that are not presently in the PDP’s
memory.
Cannot receive any channels • Run Auto Program to add receivable
when using cable TV. channels that are not presently in the PDP’s
memory.
Cannot receive or select • Run Auto Program to add receivable
channels. channels that are not presently in the PDP’s
memory.
Can not see any information ˙Turn off AC power of Box and PDP,
on display (OSD and video) and turn on again.
and the power LED is blue.
˙Poor picture
Double images or ghosts. • Check antenna/cable connections.
• Check the antenna location and direction.
˙Only snow and noise appear • Check if the antenna is broken or bent.
on the screen. • Check if the antenna has reached the end of
its serviceable life.
______________________________________________________________
˙No color. • Press MODE to select the desired Picture
Mode.
˙Color is not correct. • Adjust the Picture Mode options in the
Dark picture Video menu.
_____________________________________________________________