7" Portable DVD Player User's Manual PDX-0075

Other possibilities:
Static or other external interference may cause the player function abnormally. In order to
recover normal status, please unplug the power-supply cord and then plug it into the outlet
again to reset the player. If the problems still exist, please cut off the power supply and
consult your service center or the qualified technician.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
There is no picture.
The LCD may be not in
correct video mode.
Choose the correct video
mode.
The system connection may
be not correct.
Connect the system
correctly.
The unit may be not in AV
out mode.
Switch AV IN/OUT on the
right panel to OUT.
Poor AV performance.
The disc may be dirty or
warped.
Clean or change the disc.
The remote control
does not work
There may be some
obstructions between the
remote control and the
player.
Remove the obstruction
between the remote control
and the player.
The remote control may not
be pointed at the player.
Point the remote control at
the player directly.
The batteries of remote
control may be out of power
or weak.
Make sure the polarity of
each battery is correct.
The batteries of remote
control may not be inserted
correctly.
Replace the batteries.
Troubleshooting
41