7” Portable DVD Player PDV-0744M Operation Manual
Contents Safety Precautions ..................... 3 ■ Title Menu ............................. 18 Precautions with Moisture .......... 5 ■ Previous and Next................. 18 Function Features ...................... 6 System Setup ............................. 19 Parts Introduction ....................... 7 ■ General Setup....................... 19 Remote Control .......................... 8 ■ Speaker Setup ...................... 20 Connections ...............................
Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be sufficient to constitute a risk of electric shock to persons.
Important Safety Instructions 1. Read these instructions. IMPORTANT FOR LASER PRODUCTS 2. Keep these instructions. 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. 3. Heed all warnings. Avoid direct exposure to beam. 4. Follow all instructions. 3. CAUTION: Do not open the top cover. There are no user service-able 5. Do not use near water. parts inside the unit. Leave all servicing to qualified service personnel. 6. Clean only with dry cloth. 7.
Precautions with Moisture Under the following circumferences, moisture may appear on the lens of the product, which is the most sensitive part of the DVD player: - The DVD player is suddenly moved from a cold place to a warm place. - A room is heated while the DVD player starts operating, or the DVD is placed by an air-conditioner. - In the hot summer season, the DVD player is moved from an air-conditioned room to a hot, damp place to be used. - The DVD player is being operated in a damp place.
Function Features 1. EXCELLENT SOUND 7. LAST MEMORY PLAYBACK Dolby Digital delivers great sound. Memorizes and continues playing from 2. HIGH RESOLUTION place stopped. 8. ON-SCREEN DISPLAY MPEG2 decoding format achieves more On-screen displays in your choice of than 500 lines of horizontal resolution. English/Spanish/French. 3. SPECIAL FUNCTIONS 9. AUDIO OUT Supports multi-angle, excessive language Analog audio output and optical digital caption. audio outputs connect to any amplifying 4.
Parts Introduction DVD Player 1. OPEN button 14. Speaker 2. Remote sensor 15. Bright up/down 3. Disc cover 16. Color up/down 4. Lights red when the power switch 17. TFT Liquid Crystal Display 18. Earphone/speaker volume knob 19. Earphone jack is on. 5. Lights green when the player is in operation. 20. 6. ENTER button 7. Direction buttons 21. 8. TITLE button 22. 9.
Remote Control 1. PWR button -Press to turn the player on or off. 2. INFO button -Press for detailed information on the disc playing. -Keep pressing to remove information from screen. 3. TITLE button -Press to display titles if present on the disc. -Press to select random play when playing a CD. 4. Direction buttons -Press to select menu items. -8- 5. ENTER button -Press to confirm the items or setting. 6. SETUP button -Press to access the DVD player’s setup menu. 7.
Remote Control 9. 10. NEXT SKIP button -Press once to stop playback and then -Press to go to next chapter. press PLAY button to resume normal SUBT button playback. -When a DVD is playing, press to select -Press the button twice to stop playback a subtitle language or to turn subtitles completely. 18. off. 11. ANGLE button -Press to access various camera angles 19. (if the DVD disc contains multiple camera 13. time, track or title. A-B button 20.
Connections Connecting to a TV Audio/video connections 1. Always ensure that the DVD player, TV and any other electrical equipment you are connecting the DVD player to is switched off and unplugged from the power supply. 2. The easiest way to connect the DVD player to a television is via the supplied Audio/Video connections. Connect the audio/video cable from the DVD player to the TV’s audio/video inputs.
Playback Preparations Using the Remote Control 1. Referring to the drawing above, take the back cover off of the remote control and remove the empty battery receptacle. 2. Prior to shipping, a separating film was applied to the battery. Remove this film. 3. Insert the battery into the receptacle and insert the receptacle into the remote. 4. For best results, aim the remote directly at the player’s receiving window from a range no greater than 15 feet, and at angles no greater than 60 degrees. 5.
Playback Preparations Disc Formats Supported by this Player The unit can play discs bearing any of the following logos: DISC LOGO DIAMETER PLAYBACK TIME/ PLAYABLE SIDES 133 min (SS-SL) 12cm 242 min (SS-DL) 266 min (DS-SL) 484 min (DS-DL) DVD 41 min ( SS-SL ) 8cm 75 min ( SS-DL ) 82 min (DS-SL) 150 min 12cm 74 min 8cm 20 min 12cm 600 min (DS-DL) CD MP3 The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc.
Playback Preparations POWER ON/OFF Usage of Switching Power Adapter The player is supplied with a switching power adapter. 1. Connect AC adaptor to the side of the DVD player in the slot marked “Power In”. 2. Connect the rabbit joint end of the AC adaptor to the power cord. 3. Plug the two-prong end of the power cord to a grounded electrical socket. Note: Please turn player’s power off first and then unplug the power to prevent malfunction. 4.
Using and Charging the Battery Pack Charge the Battery Pack before using it the first time. Charging time is normally about 4 hours. Do not charge the Battery Pack more than 8 hours as it could reduce service life. Normally, the Battery Pack can be charged approximately 300 times. When fully charged, the Battery Pack delivers 2.5 hours of continuous power. Battery Pack should be fully charged before initial use! 1. Attaching the Battery Pack Turn the player upside down on a smooth, clean surface.
Detaching Battery Pack from the unit: If the player is not going to be used for a long period of time, we recommend that you detach the Battery Pack. Even if the unit is powered down, the unit is still consuming some power in STANDBY mode. This could lead to over discharging the battery. Make sure the power is turned off before detaching the Battery Pack. After detaching the battery pack, take care when handling the unit. 1. Slide and hold in position. Press the tab towards the front of the unit.
About Rechargeable Battery Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the bottom of the player. Under normal working conditions, the battery can be charged and discharged over 300 times. The properties of the rechargeable battery are 7.4 Volts, with a capacity of 4200Ah, interior lithium ionic electric circuit protection for recharge and discharge. If the battery is not used it will automatically discharge gradually within one month.
Basic Operation Please read these instructions carefully before using your player for the first time. 1. Turn on the player’s power by switching the POWER switch on the side of the player to “ON”. 2. Press OPEN button on front panel to open the disc cover. 3. Remove the lens cover. 4. Load disc with the label facing up to prevent damage to the player or disc. 5. Close the disc cover. The player will automatically search for the disc and when it finds it, play will begin.
Basic Operation Stop During playback, press the STOP button on the remote control to stop playing. Press the PLAY button, then the player will play from the point where it stopped. Mode During playback, press the mode button on the control panel to change the aspect ratio on the screen. Title Menu 1. 2. 3. Press the TITLE button on the remote control during payback. The title menu will appear on the TFT screen.
System Setup GENERAL SET-UP You can change the default settings to customize performance to your own preference. 1. Remove the disc from the DVD drive and press the ‘SETUP’ button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby Digital Setup, Video Setup and Preference setup. 2. Press (direction buttons) on the remote control to select a category. 3. All the items in the category will appear on the TV screen.
System Setup 3. OSD Language There are five kinds of different OSD languages for selection. You can select it according to your preference. 4. SPDIF Output This item is used to set the format of digital audio. ‘SPDIF OFF’ turns off the digital audio; ‘SPDIF/RAW’ outputs the original. For example, if the disc being played is Dolby Digital, then the digital audio output is also Dolby Digital. 5. Captions You can choose captions on or off on screen during playback. 6.
System Setup Preference Page 1. TV Type Most countries around the world use one of the following TV broadcast standards: NTSC, PAL and SECAM. NTSC is used in North America and many Asian countries including Japan. PAL is used in nearly every other country. France uses SECAM. Set your DVD player accordingly, or to be safe, set it on multi. 2. Audio, Subtitle, Disc Menu This setting allows you to hear or read subtitles of a DVD in your choice of English, Spanish or French. 3.
Playback Functions Fast Forward & Rewind Press the and buttons to fast forward or rewind. Slow Forward & Rewind Press the SLOW button to slow forward or rewind. Repeat 1. Repeat a title, chapter or track. Press the REPEAT button on the remote control. Continually pressing the REPEAT button will display a menu as follows: Chapter, Title and All. 2. You can temporarily mark your own section of a DVD that you would like to play repeatedly.
Playback Functions Search by time You can use the GOTO button to search by time, namely to play from a specific time. During DVD playback, press the GOTO button once and TV screen will display the title or chapter, then you can use number buttons to select any one of them. Press the GOTO button twice, then you can use number buttons to input the time you desired (hour, minute, second), and the player will play from the inputted time. NOTE: This function is only available for DVD discs. Resume Playback 1.
Playback Functions Playing a JPEG JPEG is a common picture format that has few bytes and low loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to realize real digital album, use film to make ”PICTURE CD”, namely JPEG format. OPERATION 1. Normal Playback Load a JPEG disc in. After reading the disc, OSD will display the menu (the left side is the main menu and the right side is its submenu). Use the direction buttons and ENTER button to choose items.
Care of Discs How to hold discs When loading or removing discs, try not to touch their playing surfaces. Cleaning Care Use a soft, dry cloth for cleaning. For stubborn dirt, soak the cloth in a detergent solution; ring well first and wipe. Use a dry cloth to wipe it dry. Do not use any volatile agents such as benzene or paint thinner, as they may damage the surface of the player. Cleaning Fingerprints or other dirt on the disc may affect sound and picture quality.
Carrying Case INSTRUCTIONS FOR ATTACHING YOUR PORTABLE DVD PLAYER CASE IN A VEHICLE Please read and follow these instructions carefully when attaching this case inside your vehicle. For ease of installation, do not place the DVD player into the case until after the case is attached inside the vehicle. CAUTION 1. Do not use this DVD Player Case as a swing, car seat, or for any other purpose except to hold a DVD player and accessories. 2. The DVD Player Case is intended for viewing only from the rear seats.
Ph Photo 1 Photo 1 Photo 2 A C Suspend the DVD Player Case between 2 bucket seats: 1. 2. 3. 4. 5.
Troubleshooting SYMPTOM WHAT TO CHECK The player cannot play. -Make sure the disc cover is closed. -Make sure the AV IN/OUT switch on the side of the player is in the OUT position for standard play -Make sure a disc is loaded. -Make sure the disc isn’t loaded upside down. -Disc should be clean, not dirty or warped. -Player’s region code should be the same as region code of DVD disc. -Has water condensation has occurred? If it has, remove the disc and keep the player powered up for at least two hours.
Specifications TFT screen size 7 inches Laser Wavelength Wavelength: 780/650nm Video System NTSC Frequency Response 20Hz～20kHz ±2.5dB Audio Signal-to-noise Rate 85dB Audio distortion + noise -70dB (1kHz) Channel Separation 70dB (1kHz) Dynamic Range 80dB (1kHz) 0.2 Analog Audio Out Out Level: 2V±1.0 , Load: 10k Digital Audio Out Out Level: 0.5VP-P, Load: 75 Audio Out Out Level:1VP-P±0.
