7"Two Screen Car DVD Player User's Manual PDM-2726M

19
READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD
PLAYER FOR THE FIRST TIME.
WARNING: Do not play poor-quality discs to avoid damaging the lens.
Pre-operation
1. Connect the unit to power supply through the provided DC adaptor.
2. Switch “POWER ON/OFF” to “ON” on the left panel to turn on the DVD player.
3. Press OPEN button on the unit to open the disc tray cover, put a disc in the disc tray
with printed side facing up. Close the disc cover. (See below)
4. The player will read the disc automatically.
5. Adjust the volume with the VOLUME control on the right panel to the desired level.
6. To turn the player off, switch the “POWER ON/OFF” on the left panel to “OFF”.
Using of General Button
Playback Operation
Press the FUNC button to change the brightness and
color level. Adjust these values with + and - buttons on
the front panel. Press and hold the FUNC button for
about 1 or 2 seconds to change the aspect ratio
between 16:9 and 4:3. See the below for details.
FUNC button