PBTE103 User manual
Specs for products： Bluetooth version + SPECS：Bluetooth V5.0+EDR Support protocol：HFPV1.2, A2DPV1.3,AVRCPV1.4，HSP1.6,GAVDP1.2,IOP SNR(Signal to Noise Ratio): 96dB SNR stereo ADC and stereo DAC Sensitivity：-80dBm<0.1%BER Transmitting distance：About 10m Frequency response：2.4 -2.480GHZ Transmission power：CLASS2，4dbm Audio to SNR(Signal to Noise Ratio) ：≥75dB Audio Performance：SBC Battery Specs：3.7V/60mAH(Built-in Lithium-Polymer Rechargeable Battery) Charging voltage：DC5V 45mA Charging time：About 1.
Function description： Turning On of device：Long press ON”. Turning off of device：Long press Off”. 2 second on，Voice prompt“Power 2 second on，Voice prompt“Power Pairing status： 1：First time pairing：Boot into pairing mode automatically，Voice prompt“the bluetooth device is ready to pair”. Equipment open bluetooth connection interface option“PBTE103”clik connect，no password . After the success of the matching voice Prompt“The bluetooth device is connected successfully”.
Operation Guide： Get through --------------------------------Short press Hang up -------------------------In a call short press Replay the last phone number -----------Double-click Play/Pause Music --------------------Short press Volume control to up and down ----Long press / Song switch to up and down ----------Short press / LED Light status： 1：Charging status -----Long bright red light,full charged red light off.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
