Owner manual LCD TV with Digital Tuner

ENGLISH

Chapter 3 Using the LCD TV

Chapter 3

USING THE FEATURES

Tuning in the TV channels

After connecting an aerial to your LCD TV and connecting the mains cable to the TV and

230VAC mains socket, turn the POWER SWITCH of rear TV on, a red light will show on the

front centre panel of the TV.

Press the POWER button, the red light will change to green and the First Time Installation

screen will show:

1. Make sure an aerial is  tted then press OK button on the remote to start the Auto

Programme Scan (APS).

2.In a short while you will see the TV programmes brie y as each channel is received and

stored in the memory. When APS is completed BBC1 digital TV will show, press CH+/-

buttons to view the other channels stored.When  nished ATV scan.TV will Auto change to DTV

do the  rst installation channel. To view analogue TV press INPUT button and

use the up / down arrow buttons to select TV and then Press the OK button.Change

channels by pressing the CH +/- buttons.

To power o press the POWER button, the green light will change to red.

Selecting a INPUT

Press the INPUT button to display the function required (TV/AV).Using the arrow buttons

on the remote highlight the function required and press the OK button to select the function.

Select TV Channel

Press the CH.+/- button on the remote control and the CH.+/-button on the LCD TV to change

the TV channels.

You can directly select the TV channel required by pressing 1,2 or 3 etc on the remote

button pad.

Adjusting the Volume

Press the VOL. +/– button on the remote control or the VOL. +/- button on the LCD TV to adjust

the volume.

To Mute the Sound

Press MUTE and the sound cuts o .

To turn mute o , press the MUTE button again, or simply press the VOL +/- button.

Sleep Timer

Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the

OFF,15,30,60minutes; when the LCD TV has reached the set time, it will automatically turn o . If

the TV has no input signal, it will automatically power down to standby after 15 minutes.