Operation Manual

65
Polaroid L104 / L106
The video output signal can be switched to NTSC or
PAL to accommodate different regional standards. The
appropriate setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
Note: The TV output will not perform properly if an
incorrect video system is selected.
Use this setting to configure your video system to your
current area.
1. Select the Video System in the Connection Setup
menu.
2. Use the
Up/Down navigation buttons to select
NTSC or PAL. Then press the button to confirm.
Video System
Transmission