User Guide

7
After powering on your camera for the first time, you will be prompted to select a language for the
camera. The Language selection menu appears. Select the language of your choice by pressing
the UP and DOWN direction control buttons. Then press the SET button to confirm the selection.
Once a language has been selected, you will be asked if you would like to continue with the initial
camera setup. A message will appear: “Continue with Camera Setup?”
Select “Yes” to continue or “No” to exit the setup.
Note: If you select “No” and decide to leave the camera setup, the camera will be set to its default
settings. These settings can be adjusted at any time manually through the menus in the camera.
The next step in the initial camera setup is to set the date and time on the camera.
Set the Date and Time as desired by pressing the RIGHT and LEFT direction control buttons to
choose the specific setting and the UP and DOWN buttons to change each setting.
Once you have completed setting the time and date, press the SET button to confirm the
selection and finish the camera setup.
Next you will be asked to set the default Insta-Share destination for photos and videos taken with
your camera.
The Insta-Share technology allows you to quickly and easily upload your camera’s photos and
videos to social networks with the accompanying software application.
1) First you will be asked to choose the default Insta-Share social network for Photos. Highlight
the desired default social network and press the SET button to confirm the selection.
2) Next you will be asked to choose the default Insta-Share social network for Videos. Highlight
the desired default social network and press the SET button to confirm the selection.
Congratulations! Your camera is now ready to use.