Security Camera User Manual

8 9
IP100 Manual
4. The camera’s IP Address can be changed, but it should always be the
same IP address as your computer’s subnet.
This is the DNS Server address which is provided by the network server.
In Windows, you can perform a ping test to make sure the IP camera is properly
connected and functioning. In the CMD window, which can be accessed
in Windows 7 by clinking on the Start icon, then on All Programs, then on
Accessories, and nally on Command Prompt, or by simply entering the letters
cmd in the search eld and pressing Enter, type or copy in: ping 192.168.1.111.
If you are able to ping the IP camera, that means the IP camera is working
properly and connected correctly.
3.2 Software installation
Software installation:
The IP camera system software is very easy to install via the installation
program.
Insert the CD into your computer’s CD drive. The CD will automatically run the
software installation of the IP camera user interface (IPCamSetup). Note: If the
CD does not run automatically, you will need to access the CD drive and double-
click on IPCamSetup. Follow the steps to install the software.
If the IP camera software interface does not appear, click “autorun.exe” on the
CD.
Then locate “search.exe” . Click and install the LAN Tool to
your computer. You will then be able to see the “IP Camera Tool” icon on your
computer’s desktop
.