GL10 Instant Mobile Printer User Manual NEED HELP? Visit www.polaroid.com.
Safety Information This Instant Mobile Printer has been tested and is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
accept any interference, including interference that may cause undesired operation of this device. CAUTION RISK OF EXPLODING IF BATTERY IS REPLACED BY AN INCORRECT TYPE. BATTERY CAUTIONS 1. 2. 3. 4. Use only the provided charger with this product. Only charge the battery as recommended by the instructions. The battery provided with his product is intended for this product only. Prolonged use of the printer will result in the battery becoming warm. BATTERY WARNINGS 1. 2. 3. 4. 5.
Product Diagram ZINK Paper® door latch Photo exit slot Battery door AC adaptor input BACK VIEW Power button FRONT VIEW ZINK Paper® tray door SIDE VIEW Reprint/Reset button Transfer LED indicator USB connectors Error LED indicator Battery LED indicator LED Color Action Communication Green Solid Power on, template disabled Orange Solid Power on, template enabled Green Pulse Receiving data, printing, cooling Orange Pulse Receiving data, printing, cooling with template Red Pulse (1x
Installing and Charging the Battery 1 Installing and Charging the Battery 2 Install battery 3 Replace battery door cover To charge the battery: 1. Install the battery (see above steps). 2. Connect the AC adapter to the printer and the power source. 3. Turn on the printer. Notes: • • Before using the printer on battery power, fully charge the battery for 2.5 hours. You can print photos while plugged into the power source.
Installing ZINK Paper® 1 Press and release latch on the ZINK Paper® tray door. 2 Unrwrap the 10-pack of ZINK Paper®. Slide the 10-pack of ZINK Paper® into the printer. Make sure the blue ZINK SmartSheet® is placed with the barcode down. 3 Close the ZINK Paper® tray door. Press and hold the POWER button to turn on the printer. When you turn the printer on, the ZINK SmartSheet® will 4 automatically eject. ZINK ® Smart she et ® Notes: • • • • The printer must be empty before refilling.
Printing: Camera Cell Phone Passcode: 6-0-0-0 For specific printing directions for your phone, visit www.polaroid.com. The following is an example for connecting to the printer and print your images. The terminology used in your cell phone may be different. 1. Select the image you would like to print from the stored images on your camera cell phone. In the “options” menu, select “send via Bluetooth.” Search for devices and select the Polaroid printer and print. 2.
Printing: Digital Camera For specific print directions for your digital camera, please review your digital camera user’s manual or manufacturer’s website. The following is an example for connecting to the printer and print your images. The terminology used in your camera may be different. 1. Connect your digital camera and printer to determine if a print option or printer icon is automatically displayed on the camera screen. 2.
Troubleshooting Problem Solution The photo has streaks DO NOT: Send another image to be printed. DO: Turn off the printer. Open the ZINK Paper® tray door and remove the ZINK Paper®. Place one blue ZINK SmartSheet® (with the barcode facing down) in the paper tray. Close the ZINK Paper® tray door and turn the printer on. The ZINK SmartSheet® will automatically eject. Open the ZINK Paper® tray door and reload the ZINK Paper®.
