9” HD-Ready LCD TV/DVD Combo FXM-1911C 20060331
Table Of Contents Important Safety Instructions--------------------------------------------------2 Product Features ---------------------------------------------------------4 Disc Information -------------------------------------------------------------------5 Front Panel---------------------------------------------------------------------------6 Rear Panel----------------------------------------------------------------------------8 Remote Control-------------------------------------------------------------
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions Note: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit. Leave all servicing to qualified service personnel. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Product Features This product incorporates a DVD player, LCD display and TV receiver in one system. Multiple Modes DVD mode Component mode VGA mode TV mode COMPOSITE mode S-VIDEO mode Auto TV Searching Function Can be connected to the TV antenna, support Auto and manual TV programs searching function. Advanced Playing Features High Quality Property Compatibility High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines. DVD, CD, compatible.
Disc Information Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) DVD Audio+Video (active picture) 12cm 242min(SS-DL) 266min(DS-SL) 484min(DS-DL) CD JPEG z z Audio Still high resolution 12cm 74min 12cm The operating method of some DVD discs is specified by the software maker. Please refer to the instruction manual of the disc.
Front Panel 1. 19" color TFT screen 19" color TFT screen clearly show your images. 2. SOURCE button Press to select the modes: DVD, Component, VGA, TV, COMPOSITE or S-VIDEO. 3. MENU button Press to enter or exit setup menu. 4. CH▲/▼ button In the TV mode, press to select channels. In setup menu, the same function as ▲/▼ direction buttons. 5. VOL▲/▼ button In the TV mode, press to decrease or increase the volume. In setup menu, the same function as ◄/► direction buttons.
Front Panel (Continued) 7. ■ STOP button Press to stop playback, then press the PLAY button to resume normal playback in DVD mode. Press the STOP button twice to stop playback completely. 8. Eject button Press to eject the disc out. 9. Power button Press to enter or exit the standby mode. 10. SD/MS/MMC Card Port Insert the SD, MS or MMC card into the port. 11. Disc Tray Slot Used to load disc into the unit. 12. Earphone Jack When connected to earphone, the internal speakers will automatically turn off. 13.
Rear Panel 1. Y/Pb/Pr Input Jack (Component) Connected to the Y/Pb/Pr input in Component mode. 2. L/R Audio Input Jack Connected to the L/R audio input in Component mode. 3. AV Output Jacks Connected to the external AV input device. 4. AV and S-Video Input Jacks In the S-VIDEO mode, connected to S-VIDEO signal input. In the COMPOSITE mode, connected to the external video signal input. The L/R audio input jacks can be used in the both S-VIDEO and COMPOSITE 5. 6. 7. 8. -8- modes.
Remote Control Preparation of Remote Control Using the Remote control Softly push the back cover to open the battery compartment. Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit. Insert two batteries (1.5V, size AAA), please make sure the polarity matches the marks inside the compartment. Softly press the back cover to close it. • z z The operating distance may depending to the brightness around.
Remote Control Basic Operation 1. POWER button Press to enter or exit the standby mode. 2. 0~9 Number buttons Press to select numbers. 3. LAST button In the TV mode, press to return to the channel last viewed. 4. MTS button Press to activate MTS function in TV mode. 5. VOL +/- button Press to increase or decrease the volume. 6. CCD button In the TV or COMPOSITE mode, press to display the closed captions or cancel display. 7. EXIT button Press to exit the setup menu. 8.
Remote Control 8. TITLE button When a DVD disc is playing, press to go to title menu if the disc contains. 9. MENU button (in DVD mode) Press to enter the disc menu in DVD mode. 10. REPEAT button Press to repeat a chapter, track, title or all content in DVD mode. 11. ANGLE button Press to select various camera angles (if the DVD disc contains multiple camera angles). 12. A-B button Press to mark a segment to repeat between A and B during DVD disc playback. 13.
System Connections • Do not connect the power cord to the unit until all other connections have been made. • Ensure that you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source.
System Connections (Continued) Connecting to External AV Signal Source（YPbPr） Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the SOURCE of the remote or the unit and select Component as the input mode..
System Connections (Continued) Connecting to External AV Device (AV Out) The unit supports audio and video signal input function, it can be connected to the external audio and video device. Use the audio and video cables to connect the AV output Jacks on the rear panel of the unit to the external AV input device.
System Connections (Continued) Connecting to PC The unit can be connected to PC (personal computer) via the VGA cable. Follow these steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit. 4. Connect the other end to the PC audio output jack. 5.
System Connections (Continued) Connecting to Earphones This unit can be connected to an earphone for listening music privately. See the below figure for details: After connecting to the earphone, the internal speakers will turn off automatically. Connecting to Power Adapter Power is supplied through the provided appropriative power adapter, one end is connected to the DC 12V IN jack on the rear panel of the unit, the other end to the AC100~240V wall outlet.
System Connections (Continued) Connecting to TV Antenna This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power of the unit, press the SOURCE button of the remote or the unit and select TV as the input mode. After connecting to the antenna, you can turn on the unit. To select channels you can do the following steps: 1.
TV Setup and Operation Preparations 1. After making your connections, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is only available when there is signal input.
TV Setup and Operation (Continued) Contrast Setup Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Saturation Setup Press the ▲▼ button to select Saturation and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu.
TV Setup and Operation (Continued) Treble Setup Press the ▲▼button to select Treble and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. Balance Setup Press the ▲▼ button to select Balance and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. Sound Mode Setup Press the ▲▼ button to select Sound Mode and press the ENTER button to enter.
TV Setup and Operation (Continued) Parental Setting Note: The Parental Function is the same as that of V-CHIP. Press the MENU button to enter the setup menu. Press the ▲▼ button to select Parental and press the ENTER button to enter the menu shown on the right. In the Parental setup menu, press the ENTER button and then use the number buttons to enter the pin. The initial pin is 1111. Then press the ENTER button to continue and display the menu as shown on the right. Note: The Master password is 3308.
TV Setup and Operation (Continued) Clear All Press the ▲▼ button to select Clear All and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu. TV Rating Press the ▲▼ button to select TV Rating and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection.
TV Setup and Operation (Continued) CA Eng Rating Press the ▲▼ button to select CA Eng Rating and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu. CA Fr Rating Press the ▲▼ button to select CA Fr Rating and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection.
TV Setup and Operation (Continued) Setup Setting Press the MENU button once to enter the setup menu. Press the▲▼ button to select Setup and press the ENTER button to enter the menu shown on the right. In the Setup menu, press the▲▼ button to select the desired item and press the ENTER button to enter. Press the MENU button to return to the previous menu. Tuner/Channel Press the ▲▼ button to select the Tuner/Channel and press the ENTER button to enter the menu as shown on the right.
TV Setup and Operation (Continued) Channel System Press the ▲▼ button to select Channel System and press the ENTER button to enter. Press the ▲▼ button to select the desired item and then press the ENTER button to confirm your selection. Press the MENU button to return to the previous menu. Prog Organizer Press the ▲▼ button to select the Prog Organizer and press the ENTER button to enter the menu as shown on the right. In the Prog Organizer setup menu, press the ▲▼ button to select the desired item.
TV Setup and Operation (Continued) Fine Tune Press the ▲▼ button to select Fine Tune and press the ENTER button to enter. Press the ► or ◄ button to start fine tuning forward or backward. Press the MENU button to return to the previous menu. Language Press the ▲▼ button to select the Language, press the ENTER button to enter the setup, press the ▲▼ button to select item. Press the MENU button to return to the previous menu.
DVD System Setup Preparations 1. Connect to the power supply and turn on the unit. 2. Press the SOURCE button to select the DVD mode. 3. Press the SETUP button on the remote control to display the settings menu. The menu includes General setup, Audio setup, Video setup, and Preference. 4. Press the direction buttons on the remote control to select a category. All the items in the category will appear on the screen. 5. Press the SETUP button again to exit the setup.
DVD System Setup (Continued) OSD Lang The item is used to select the OSD language. 1. Press the direction buttons to select OSD Lang. 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select items. 4. Press the ENTER button again to confirm selection and return. Screen Saver 1. Press the direction buttons to select Screen Saver. 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select On or Off. 4.
DVD System Setup (Continued) Audio Setup Page Press the SETUP button to enter the General setup menu, then use the direction buttons to select Audio Setup Page, the screen will display as the following: In the menu, Use the direction buttons to select the desired item. Press the ENTER button to enter the item. Press the button to return. Dolby Digital Setup 1. Press the direction buttons to select Dolby Digital. 2. Press the ENTER button to enter the setup, the screen will display as left: 3.
DVD System Setup (Continued) Hdcd Setup In the Audio Setup Page, use the direction buttons to select Hdcd Setup, press the ENTER button to enter the setup, the screen will display as below: 1. In the menu, press the ENTER button to enter the setup. 2. Use the direction buttons to select items. 3. Press the ENTER button again to confirm selection and return. 4. Press the button to return.
DVD System Setup (Continued) Sharpness 1. Press the direction buttons to select Sharpness. 2. Press the ENTER button to enter the setup. 3. Use the direction buttons to select High, Medium or Low. 4. Press the ENTER button again to confirm selection and return. Brightness 1. Press the direction buttons to select Sharpness. 2. Press the ENTER button to enter the setup, the screen will display as left: 3. Use the direction buttons to adjust the level. 4.
DVD System Setup (Continued) Audio 1. Press the direction buttons to select Audio. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the direction buttons to select audio language. 4. Press the ENTER button again to confirm setting and return. Subtitle 1. Press the direction buttons to select Subtitle. 2. Press the ENTER button to enter the setup, see the left figure: 3. Press the direction buttons to select Subtitle language. 4.
DVD Playback Operation Preparation：After making all your connections turn on the unit and select the relevant video input before playback. Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the SOURCE button to shift to DVD mode. 2. Please handle the disc with its printed side outward vertically to the disc tray. (Referring to the below picture.) 3. Slightly put the disc into the disc tray. 4.
DVD Playback Operation (Continued) Stop Press the ■ STOP button once to stop playback and then press PLAY button to resume. Press this button twice to stop playback completely. Pause Press the PAUSE button once to pause the playback, press it repeatedly to start frame-by-frame playback, press the PLAY button to resume normal playback. Previous and Next Press the button to go to the next chapter or track.
DVD Playback Operation (Continued) Language (Audio) There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc you can press the AUDIO button on the remote control to select a language. Subtitle The DVD player can support multiple kinds of subtitles. When you play a multi-subtitle disc you can press the SUBTITLE button on the remote control to select different subtitles.
DVD Playback Operation (Continued) Fast Playback Press the or FWD/REV SCAN button on the remote control to activate fast backward or forward playback. Repeat Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat. ◆ Some discs do not support the repeat function. Audio During CD playback, press the AUDIO button on the remote control to select the audio output mode: Mono Left, Mono Right, Mix-Mono and Stereo. GOTO Press the GOTO button to access the time-selected state.
DVD Playback Operation (Continued) Previous and Next During playback, press the or button to select picture. Menu Press the MENU button once to stop playback and return to the root menu. GOTO During playback, press the GOTO button on the remote control once, use the number buttons to input the file number. Picture Rotation This can be used only when the picture is normally displayed. Once another picture is selected, rotation will be cancelled automatically. Use the buttons to rotate the picture.
USB and SD/MS/MMC Card Function USB and SD/MS/MMC Card Function Preparation: 1. Connect the unit to the power supply. 2. Press the POWER to turn on the unit. 3. Press the SOURCE button to shift to DVD mode. 4. Insert the USB into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit. Please see the below figure: ¾ Make sure that files are stored in the USB and the SD/MS/MMC card before the connection. 5.
Other Functions External AV Input Function The unit has external AV input function. It supports COMPOSITE, S-VIDEO and Component modes. Use the audio, video and S-Video cable to connect the unit to the external AV signal source such as recorder, vidicon, satellite receiver or game player etc. Then turn on the unit and the external AV signal source. Press the SOURCE button to shift to the corresponding mode: S-VIDEO or Component. Then you can go on to set up the menu in a certain mode.
Troubleshooting SYMPTOM CHECK ITEM The player cannot play. Make sure disc is loaded in. Make sure disc is loaded correctly. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. If it occurs, take out disc and leave the player on for at least one hour. There is no sound. Make sure system connection is correct. Make sure the sound setup of DVD disc is correct. Make sure disc is not dirty or warped.
Specifications TFT-LCD Resolution 1440 x 900 TFT-LCD Screen Size 19 inches AC100～240V，50/60Hz Power DC 12V 5A Power Consumption < 60W Dimension 494mm × 184mm × 412mm（LXWXD） Weight About 8.26 Kg Ambient Temperature 10~45℃ DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc. All rights reserved.
- 42 -
