9”/ 48cm HD-Ready Widescreen LCD FLU-1911SA 20060719
ENGLISH Safety Instructions IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Instructions ENGLISH IMPORTANT SAFETY INSTRUCTIONS To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc..
ENGLISH Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Do not attempt to service the equipment yourself. Opening and removing the covers may expose you to dangerous voltage or any other hazards and may void your warranty. Refer service from qualified personnel. Do not place or drop any other objects on top. Do not insert anything into the ventilation holes of your equipment.Inserting any metal or flammable objects may result to fire or electric shock.
ENGLISH ANTENNA CONN. ANTENNA CONNECTION EXAMPLE OF OUTDOOR ANTENNA GROUNDING If an outdoor antenna is connected, follow the precautions below: An outdoor antenna should not be located anywhere that can be in contact of overhead power lines, or any other electric light or power circuits. When installing an outdoor antenna system, extreme caution should be taken to prevent contact with power lines. Direct contact with power lines may be fatal and should be avoided at all costs.
ENGLISH ANTENNA CONN. ANTENNA CONNECTION Cable TV (CATV) Connection A 75- o h m co a xia l ca b le co n n ec to r i s bu i l t i n to th e s e t fo r e a s y h o o k u p. When connec ting the 75- ohm coaxial cable to the set, place the 75- ohm cable into t h e A N T. te r m i n a l. Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
ANTENNA CONN. ENGLISH ANTENNA CONNECTION ANTENNAS The antenna requirements for good color TV reception are more important than those of a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems.
ENGLISH CONTENT CONTENT PREPARATION .......................................................................................................................................................... 8 Features .................................................................................................................................................................................................................... 8 Package Contents ............................................................................
ENGLISH PREPARATION Congratulations on the purchase of your new High Def inition Compatible Television. In order to maximize the potential of this television, you must use it in conjunction with a High Def inition Signal Source, utilizing a proper High Def inition receiving unit (of ten referred to as a “set-top” box). Only “true” High Def inition transmitted video will yield optimum picture qualit y.
ENGLISH Package Contents Once you open the box, make sure all of the following contents are included. If you’re missing any items, please return this product to the original place of purchase. LCD TV PREPARATION Remote control/ AAA batteries Video Cable Component Cable Power Cord Audio Cable Warranty Card Quick Start Guide User’s Manual These items are all you need to set up and operate the LCD TV in its basic configuration. *Most devices (VCRs, DVD player, etc.
ENGLISH LCD TV PREPARATION Front View PHONES VO L. 10 VO L. CH CH ME NU INPUT ITEM DESCRIPTION 1 IR Infrared Receiver (IR) 2 POWER Turns the LCD TV on and off. 3 LED The LED light indicates when the LCD TV is activated (green light indicates on and amber indicates off ). 4 INPUT Chooses from different input signal sources. 5 MENU Press MENU to display the OSD (on screen display). Press again to turn the OSD off. 6 CHANNEL Scans up and down through channels.
ENGLISH LCD TV Rear View PREPARATION ITEM DESCRIPTION 1 AC IN Connects the AC power cord. 2 AUDIO IN 1 Connects to the audio or video equipment with left and right audio output jacks of the component (Y, Pb/Cb, Pr/Cr). 3 COMPONENT Connects to the component (Y, Pb/Cb, Pr/Cr) video jacks on your DVD player, HDTV Tuner source, or video equipment. 4 S-VIDEO Connects to the S- VIDEO output jacks and Audio output jacks on your video equipment.
ENGLISH Remote Control 1 POWER Turns the LCD TV on and into standby mode . 2 PC Press to select PC mode. I-II Cycles through the TV Sound options: MONO/DUAL/STEREO 3 Turns on and off the Teletext function. “Not all region supports Teletext- Please check with your program service provider” 4 Mutes and restores your LCD TV sound. PREPARATION 5 6 SLEEP Sets the sleep timer. 7 P.SIZE Selects from the following modes settings: 4:3, 16:9.
ENGLISH Remote Control Installing the batteries in your remote control 1 3 Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends indicated in the battery compartment. PREPARATION 2 Pull the tab of the back cover and pull up on the cover to open the battery compartment of the remote control. Align the lower tabs of the back cover to the remote control and snap the cover into place.
ENGLISH Using your LCD TV 1 You may adjust the tilt angle of the LCD TV about +15 deg. / -0 deg. -0 PREPARATION 15 2 o o Always turn the LCD TV off when the LCD TV is not in use for a long period. The Power button is only used for switching the LCD TV into standby mode, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please switch off the power switch on the rear, or remove the power plug from the socket.
ENGLISH INSTALLATION Refer to the owner’s manual of the external equipments to be connected.When connecting external equipments, do not connect any AC power cords to wall outlets until you have completed all the connections. Connecting a TV cable or Antenna Basic Connection: Connecting cable or an antenna . Antenn a Connec t to a w al l outlet B INSTALLATION A Antenna/75- oh m coaxia l inpu t 1 A: Use a supplied antenna cable to connect the VHF/UHF to your LCD TV.
ENGLISH Connecting a DVD Player INSTALLATION For best picture quality, if your equipment has (RGB) video output,please use component cable instead of a standard video or RGB cable. 1 METHOD A HDTV (AV3) Use a Component cable to connect the Y/Pb(Cb)/Pr(Cr) jacks on the DVD player to your LCD TV. Use an audio cable to connect the DVD’s audio jacks to your LCD TV. METHOD B S-VIDEO (AV2) Use an Audio cable to connect the DVD’s audio output jacks to your LCD TV.
ENGLISH Connecting a VCR & a Video Camera 1 METHOD B VIDEO (AV1) Use an A/V cable to connect the VCR’s/ VIDEO CAMERA’s. composite output jacks to your LCD TV. 2 Connect all power sources before turning on the power for the LCD TV or other connected equipments. 3 Press the POWER button to turn on your LCD TV. 4 To watch VCR or VIDEO CAMERA, press the SOURCE button to select AV1 or AV2.
ENGLISH INSTALLATION Connecting a TV Box and Satellite Receiver 1 METHOD A VGA (AV4) Use a D-SUB cable to connect the TV Cable Box D-SUB connector to your LCD TV. Use an Audio cable to connect the TV Cable Box and your LCD TV. METHOD B HDTV (AV3) Use a component cable to connect the Y/Pb(Pb)/Pr(Cr) jacks on the satellite receiver to to your LCD TV. Use an Audio cable to connect the Satellite Receiver audio jacks to your LCD TV.
ENGLISH USING THE FEATURES Basic Operation Turning the TV On and Off 1 After connecting a CATV or antenna to your LCD TV, and turn the POWER SWITCH of rear TV on, an amber LED light indicates when the LCD TV is activated. 2 Press the POWER button, the LED green light indicates on. 3 Press the POWER button, the LED amber light indicates off. Select Source Press the SOURCE button to display the selection signal on the screen.
ENGLISH OSD Menu Operation 1 The main menu provides access to the following menus: Video Adjust picture setting such as brightness, contrast,saturation and color temp. Audio Adjust sound option and effects. Tuner Adjust channel searching such as auto search, manual search. Setup Set up miscellaneous fetures. 2 Press the MENU button on the remote control. The main menu will appear on the screen. 3 Use ▲/▼ to highlight your main menu option, then press OK to enter your selected option.
ENGLISH Video Sharpness Adjust to sharpen or soften the picture. OPTION Color Temp. DESCRIPTION Standard:Select to give the white colors a neutral tint. Warm:Select to give the white colors a reddish tint. Cool: Select to give the white colors a bluish tint. Advanced (VGA Mode only) Auto Adjust: Allows you to select the image auto adjust to be Yes or No. Image Pos Allows you to move the position of the picture in the window. Phase Increase the focus clarity in the picture and image satbility.
ENGLISH Tuner Use this Tuner setting menu to select Color System, Audio System, Auto Search, Manual Install, Prog Organizer. DESCRIPTION USING THE FEATURES OPTION 22 USING THE FEATURES Color System Allows you to select the color system : PAL,SECAM. Audio System Allows you to select the audio system : I, BG, DK. I PAL I/II (U.K. / Ireland / Hong Kong / South Africa) BG PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.
ENGLISH Tuner OPTION Prog Organizer DESCRIPTION This function enables you to delete or skip the stored programme. Also you can move some stations to other programme numbers or copy a programme to the selected programme number. Setup Use this Setup setting menu to set up some features: Language, OSD Time Out, Sleep Time, Reset. OPTION DESCRIPTION Display English only. OSD Time Out Allows selection of the display time of the on-screen menu:5 sec,10 sec,15 sec, 20 sec,25 sec, and 30 sec.
ENGLISH Setup USING THE FEATURES OPTION 24 USING THE FEATURES DESCRIPTION Sleep Time Sets up a certain time to shut off automatically:OFF/15/30/45/60/90/120 minutes. Reset Allows you to restore the factory settings.
ENGLISH TROUBLESHOOTING Before consulting service personnel, check the following chart for a possible cause of the trouble you are experiencing and for a solution. PROBLEM SOLUTION TV will not turn on Make sure the power cord is plugged in. The batteries in the remote control may be exhausted. Replace the batteries. No picture, no sound Check the interface cable between TV and antenna/cable TV. Press the Power button on the remote.
ENGLISH SPECIFICATIONS Model Panel System FLU-1911SA 19 inch/48cm LCD panel Display Resolution 1440 pixels (horizontal) x 900 pixels (vertical) Television System PAL SECAM Brightness 400 cd/m2 Contrast Ratio 500:1 Inputs/Output Composite Video In 1 S-Video In 1 Component In 1 PC 1 PC Audio In 1 Audio In 3 TV 1 SPECIFICATIONS Speaker Out 26 Power Source(MAX) Dimension( W x D x H) Weight(Net) SPECIFICATIONS 3 W+3 W 100-240 V~, 50/60 Hz, 50 W 22.6 inch x 6.7 inch x 14.6 inch 12.
ENGLISH Display Mode For the display modes listed below, the screen image has been optimized during manufacture. VGA TIMING Dot X Line Horizontal Frequency(kHz) Vertical Frequency(Hz) 640 x 480 31.46 59.94 640 x 480 37.86 72.80 640 x 480 37.50 75.00 720 x 400 31.46 70.40 800 x 600 35.15 56.25 800 x 600 37.87 60.31 800 x 600 48.07 72.18 800 x 600 46.87 75.00 1024 x 768 35.52 86.95 1024 x 768 48.36 60.00 1024 x 768 56.47 70.06 1024 x 768 60.02 75.02 1152 x 864 67.
