User's Manual

System Connections
Always endure that the DVD player, TV, and any other electrical equipment to be connected are switched
off and unplugged from the power supply.
Ensure that you observe the color coding when connecting audio and video cables.
Connecting to a TV
Follow the drawing below to connect the DVD player
to the TV’s audio/video input with the audio/video
cables.
Connecting to an Amplifi er
Refer to your audio equipment’s manual before
connecting. Follow the drawing below to connect the
DVD player to an AV amplifi er.
Connecting to an External AV Source
The player supports an AV signal input function. Use
the AV cables to connect the player to an external
AV signal source such as a DVD, VCR, etc. After
connecting, switch the DVD/AV IN to AV IN.
Note: Noise may occur in speakers when there is an
external audio signal input while playing a DVD disc.
Unplug the audio cord to clear the noise.
Connecting to the Headphones
Connect the headphones to the headphone jack on
either side of the player. When headphones are
connected, the speakers will automatically turn off.
•
•
15