SprintScan Installation Quickstart 45I

English 9
5 Connect the Scanner to
AC Power and Turn On
1
Connect the power cord as shown.
2
Turn on the scanner by pressing the power switch.
3
Check the lights. The green light indicates power on. The
yellow light blinks while the scanner initializes, remaining
steady when the scanner is ready. (The green light also
blinks while scanning.)
4
Turn on the computer.
5
Wait for the system to install the scanner driver and display
the normal desktop.
a
Air intake
d
Power connector
b
SCSI address switch
e
SCSI connectors (25, 50)
c
Power switch
I
O
a
c
d
b
e
I
O
I