SprintScan Installation Quickstart 45I

English 14
7 Inserting the Carrier into the
Scanner
1
Open the carrier access door.
2
Insert the carrier gently and firmly into the carrier slot as
shown, until you feel it stop.
3
Close the carrier access door. The scanner will not scan if the
door is open.
Note:
Do not open the carrier access door while a scan is in
process; the scan will be interrupted. The scan will resume
when the door is closed, but the quality of the scan may be
reduced. Scan again with the door closed for best scanning
quality.
4
Initiate the scan from your software. The software will
prompt you when the scan is finished.