Instructions
Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly (where there is ickering light, leaking
smoke or a smell of burning, audible crackling noises, or discolouration of the product or
to adjacent surfaces)
- the product was stored for a longer period of time in unfavourable conditions
- it was exposed to heavy loads during transport
• For safety reasons, unplug the wall plug transformer from the mains socket before cleaning
the product or when the product is not to be used for a while (e.g., during storage).
Installation and start-up
a) Installing the LED strip
• The LED strip can be mounted on suitable surfaces, such as furniture or similar objects, using the adhesive
tape located on the bottom side.
The LED strip must be mounted in such a way that it is not exposed to mechanical stress. It may
not be mounted in such a way that someone can step on it; that will damage it. Protect the LED
strip and the connection cable from sharp edges.
• Carefully clean the surface onto which you want to mount the LED strip from dust, dirt and grease before
mounting; otherwise the adhesive tape will come off the surface.
• Remove part of the protective strip and stick the LED strip onto the mounting surface one section at a time.
However, do not use force when pressing down.
b) Connection of the power adapter
• Connect the low-voltage plug of the plug-in power supply to the corresponding socket of the LED strip.
• Plug the power adapter into a proper mains outlet of the public supply grid.
Maintenance and cleaning
• The product does not require any maintenance and should never be disassembled for any reason.
The built-in LED bulbs are permanently installed; they cannot be replaced.
• Before you clean the product, disconnect it from the mains voltage. Pull the power adapter from the mains
socket.
• The outside of the product should only be cleaned with a clean, soft, dry cloth.
Do not use aggressive cleaning agents or chemical solutions for this could damage the housing
(discolouring) or impair the operation.
Disposal
The product must not be disposed of in the household waste.
Please dispose of the product, when it is no longer of use, according to the current statutory
requirements.
Technical data
a) Generally
Environmental conditions ..................... Temperature 0 °C to +40 °C, Humidity <95% relative,
non-condensing
Total power consumption ...................... 7 W
b) LED-Strip
Operating voltage ................................. 12 V/DC
Power consumption .............................. max. 7 W
Length................................................... 3 m
Cross-section ........................................ 8 x 3 mm (B x H)
Number of LEDs ................................... 96 (each 24x Red, Green, Blue, Orange)
c) Power adapter
Operating voltage ................................. 100 - 240 V/AC, 50/60 Hz
Output ................................................... 12 V/DC, 0,6 A
Operating instructions
LED Strip RGB, 3 m
Item no. 1539627
Intended use
The product is intended for decorative or effect lighting in indoor areas; it may be installed and used only in
dry, enclosed indoor rooms.
The product can be fastened on suitable objects, such as furniture, using the adhesive tape located on the
bottom side of the LED strip.
For safety and approval reasons, you may not convert and/or alter the product. If you use the product
for purposes other than those described above, you may inict damage on it. Further-more, improper use
involves risks such as short-circuits, re, electric shocks, etc. Please read the operating instructions care-
fully and do not discard them. If you pass the product on to a third party, please hand over these operating
instructions as well.
This product complies with the applicable national and European requirements. All names of companies and
products are the trademarks of the respective owners. All rights reserved.
Package contents
• LED strip
• Power adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR code.
Follow the instructions on the website.
Explanation of symbols
A triangle containing a lightning symbol indicates a health hazard, e.g., electric shock.
This symbol points to specic risks associated with handling, operation or use.
The arrow symbol points to special tips and operating information.
Safety instructions
Damage due to not following these operating instructions will void the warranty! We do
not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by improper
use or non-compliance with the safety instructions. In such cases, the warranty will be
null and void.
a) General
• Unauthorised conversion and/or modication of the product is not allowed for safety and ap-
proval reasons.
• The product is not a toy and does not belong in the hands of children! Children do not realise
the danger arising from the incorrect use of electrical devices. In addition, the product contains
small parts and batteries. Therefore, be especially careful when children are around!
• Do not leave packaging material carelessly lying around, since it could become a dangerous
plaything for children.
• In commercial institutions, the accident prevention regulations of the Employer’s Liability In-
surance Association for Electrical Systems and Operating Facilities are to be observed!
• If you have any questions that are not answered in these operating instructions, please con-
tact our technical department or another specialist.
b) Installation, connection and operation
• This product must be installed and used only in dry conditions indoors. The product must not
get damp or wet, as the power adapter can pose the risk of a fatal electric shock!
• Do not use the product in rooms with adverse environmental conditions, where combustible
gases, vapours or dust are or may be present! There is a risk of explosion!
• The product must not be exposed to extreme temperatures, strong vibrations or heavy me-
chanical stress.
• The product is suitable for use only in moderate climates, not tropical climates.
• Caution, LED light: Do not look directly into the LED light! Do not look into the beam directly
or with optical instruments!
• The mains socket into which the power adapter is plugged must be easily accessible.
• Do not pull the power adapter from the mains socket by pulling on the cable.
• If the power adapter is damaged, do not use the product any longer.
Switch off the mains socket to which the wall plug transformer is connected (switch off at the
corresponding circuit breaker or remove the safety fuse, then switch off the earth leakage
circuit breaker). Unplug the power adapter from the mains socket.
• If it can be assumed that safe operation is no longer possible, the device must be turned off
and precautions must be taken to ensure that it is not used unintentionally.
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data processing systems require
the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reect the current
technical specications at time of print.
© Copyright 2017 by CEI Conrad Electronic International (HK) Limited 1539627_V3_1117_02_VTP_m_en
distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, 92240 Hirschau