Instructions
c) Back Panel (6)
A B C D
E
F
A MODE
B SET
C UP
D DOWN
E USB charging port
F Mains power jack
Operation
Risk of overheating. Do not cover the heat vent (2).
a) Getting Started
• To power the clock, insert 2x AAA type batteries (not included) into the compartment located
on the base of the unit. Replace the batteries when the display fades or the alarm no longer
responds.
• To power the lamp, connect one end of the power adapter to the power jack (F) and the other
end to the power outlet as shown below:
b) LED Light
• Touch (4) to turn the LED light on.
• Touch
again to cycle through brightness levels (low, medium, high).
• The LED light will turn off after cycling through all brightness levels.
c) Setting Time and Date
• Enter time mode by pressing MODE (A) until “TIME” appears on the LCD.
• Press SET (B) to cycle through time and date settings.
• Press UP (C) or DOWN (D) to adjust values.
To save your settings, keep pressing SET until the values stop blinking, or simply
wait for the value to stop blinking. Press UP to switch between 12 / 24hr time.
d) Alarm / Snooze Function
• Setting an alarm
- Enter alarm mode by pressing MODE until “ALARM” appears on the LCD.
- Press SET to cycle through alarm settings.
- Press UP or DOWN to adjust values.
You can set a snooze gap between (1 – 60 minutes) and choose between 8 different
types of alarm sounds.
• Turning alarm ON
- Enter alarm mode by pressing MODE until “ALARM” appears on the LCD.
- Press UP or DOWN to activate or deactivate an alarm.
Press any button to turn the alarm off.
e) USB Charging Port
• When the desk lamp is connected to a power outlet, you can charge a USB device using the
built in charging port (E).
• Make sure not to exceed the max. possible charging current. See chapter Technical Data
for details.
Care and Cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, bre-free cloth.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
Remove any inserted batteries and dispose of them separately from the product.
b) Batteries
You as the end user are required by law (Battery Ordinance) to return all used
batteries. Disposing of them in the household waste is prohibited.
Contaminated batteries are labelled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are: Cd
= Cadmium, Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash icon
on the left).
Used batteries can be returned to collection points in your municipality, our stores or wherever
batteries are sold.
You thus full your statutory obligations and contribute to the protection of the environment.
Technical Data
a) Lamp
Input voltage / current ................... 12 V/DC, 1.5 A
Batteries ....................................... 2x 1.5 V AAA type
Light source .................................. LED (non-replaceable)
Power consumption ...................... 7 W (+/- 1 W)
Light modes .................................. Low, medium, high
Lux level (+/-10%) ........................ Low (70 lux), medium (700 lux), high (2000 lux)
Colour temperature ....................... 6000 – 6500 k
LED life ......................................... 30000 hrs
USB output ................................... 5 V, 1 A (max.)
Operating conditions ..................... -5 to 40 °C, 10 – 80 % RH
Storage conditions ........................ -10 to 45 °C, 10 – 80 % RH
Dimensions ................................... 100 x 100 x 622 mm (L x W x H)
Weight .......................................... 1190 g
b) Clock
Display size .................................. 22.5 x 46 mm (W x L)
Snooze cycle ................................ 2
Snooze time adjust ....................... 1 – 60 mins
Alarm time .................................... 1 min
Alarm sound level ......................... 85 dB
c) Power adapter
Input voltage / current ................... 100 – 240 V/AC, 50/60 Hz, 0.8 A
Output voltage / current ................ 12 V/DC, 1500 mA
Cable length ................................. 144 cm
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data processing systems require
the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reect the current
technical specications at time of print.
© Copyright 2017 by CEI Conrad Electronic International (HK) Limited *1539731_v2_1017_02_01_m_en_(2)
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau