Instructions

b) Miscellaneous
• Consult an expert when in doubt about operation, safety or
connection of the device.
• Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Product overview
Operation
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
The LEDs are non-dimmable and non-replaceable.
1. Lay the product out entirely and arrange the cables so that
they lie freely and are not tangled.
2. Select a suitable installation site (i.e. wall, eave, tree or bush)
and install suitable holders for the product (i.e. screw hooks,
nails, etc.).
3. Lay the product on the holders you have just installed or on
the branches of the tree or bush. Use plastic cable ties to
fasten the product if necessary
4. Connect the plug to the correct connector on the
transformer.
5. Secure the connection by turning the plug‘s screw cap onto
the transformer‘s thread.
6. Connect the transformer to a power outlet.
7. The LEDs will turn on.
8. Repeatedly press the button on the transformer to select one
of the 9 lighting eects.
9. To turn o the product, unplug the transformer from the
mains socket.
The product has no power switch and is always on as long as
it is connected to the power supply.
Maintenance and cleaning
• The product is maintenance-free apart from occasional
cleaning.
• Disconnect the transformer from the power supply before
cleaning and allow the LEDs to cool down suciently.
• To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
• Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute
to the protection of the environment.
Technical data
a) Tree Light
Item No. 1457882
Operating voltage
24 V/DC
Power consumption
max. 3.6 W
Number of lights
240
Luminous colour
Warm White / Cool White
Power cable length
5 m
Operating conditions
0 to +40 °C / 0 – 90 % RH
Storage conditions
0 to +40 °C / 0 – 90 % RH
Weight
approx. 300 g
b) Transformer
Input voltage
220 - 240 V/AC, 50/60 Hz
Output voltage
24 V/DC
Output current
0.15 A
Output power
max. 3.6 W
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions
reflect the current technical specifications at time of print.
© Copyright 2016 by CEI Conrad Electronic International (HK) Limited
1457882_v1_0716_02_m_EN
distributed by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau
3 m
5 m