User manual
b) Miscellaneous
•Consult an expert when in doubt about operation, safety or
connection of the device.
•Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
•If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Operation
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not fasten the product directly to the installation
surface, do not use, for example, any pushpins. First
install suitable holders and then lay the product on the
holders.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
The LEDs are neither dimmable nor replaceable.
1. Lay the product out entirely and arrange the cables so that
they lie freely and are not tangled.
2. Select a suitable installation site (i.e. wall, eave, tree or bush)
and install suitable holders for the product (i.e. screw hooks,
nails, etc.).
3. Lay the product on the holders you have just installed or on
the branches of the tree or bush. Use plastic cable ties to
fasten the product if necessary.
4. Connect the plug to the correct connector on the
transformer. It is only possible to connect in one way.
5. Secure the connection by turning the plug‘s screw cap onto
the transformer‘s thread.
6. Connect the transformer to a power outlet.
7. Repeatedly press the button on the control unit to select one
of the 8 lighting eects.
8. The product features a memory function. When switching
the product o, it will save the lighting eect selected at
that time. When switching the product on again, it will
automatically select the lighting eect used most recently.
9. Disconnect the transformer from the power outlet for
extended periods of disuse.
The product has no power switch and is always on as long as
it is connected to the power supply.
Maintenance and cleaning
•The product is maintenance-free apart from occasional
cleaning.
•Disconnect the transformer from the power supply before
cleaning and allow the LEDs to cool down suciently.
•To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
•Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute
to the protection of the environment.
Technical data
a) Lightchain
Item No. PLC-06-001
Protection type IP44
Operating voltage 31 V/DC
Power consumption 5.02 W
Number of lights 480
Luminous colour Red/Amber/Green/Blue
Power cable length 5.5 m
Total length approx. 8.5 m
Operating conditions -20 to +70 °C / 10 – 90 % RH
Storage conditions -20 to +70 °C / 10 – 90 % RH
Weight approx. 540 g
Item No. PLC-06-002 PLC-06-003
Protection type IP44
Operating voltage 31 V/DC
Power consumption 5.02 W
Number of lights 480
Luminous colour Warm White Cool White
Power cable length 5.5 m
Total length approx. 8.5 m
Operating conditions -20 to +70 °C / 10 – 90 % RH
Storage conditions -20 to +70 °C / 10 – 90 % RH
Weight approx. 540 g
b) Transformer
Protection type IP44
Input voltage 100 – 240 V/AC, 50/60 Hz
Output voltage 31 V/DC
Output current 193 mA
Output power max. 6 W
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions
reflect the current technical specifications at time of print.
© Copyright 2015 by CEI Conrad Electronic International (HK) Limited
PLC-06-001-002-003_v2_0715_02_m_EN
distributed by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau