Outdoors Lightchain Micro LEDs 50 PLC-03-006 Micro LEDs 80 PLC-03-007 Operating instructions
Intended use Use this product to decorate interior and exterior spaces (IP44). It can be fastened to an eave, tree or bush. For safety and approval purposes (CE), you must not rebuild and/ or modify this product. If you use the product for purposes other than those described above, the product may be damaged. In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
a) Persons / Product • The device is not a toy. Keep it out of the reach of children and pets. • Do not leave packaging material lying around carelessly. These may become dangerous playing material for children. • Do not electrically attach this light chain to another light chain. • Always check the product for damages before use. Should you discover any damage, cease use of the product. If you discover damages while the product is in use (i.e.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product. • The lights become hot during operation. Keep the product away from highly combustible materials while operating. • The mains outlet must be located near to the device and be easily accessible. • As power supply, only use the supplied transformer. • Only connect the transformer to a normal mains socket connected to the public supply.
b) Miscellaneous • Consult an expert when in doubt about operation, safety or connection of the device. • Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop. • If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel. Product overview PLC-03-006 12.35 m 5m 15 cm 5m 15 cm PLC-03-007 16.
Operation Do not set up or operate the product under water. Make sure that the cables hang loosely and are not stretched too tightly. Failure to heed this warning may cause the cables to tear. Do not fasten the product directly to the installation surface, do not use, for example, any pushpins. First install suitable holders and then lay the product on the holders. Do not connect the product to the power supply while it is still in the packaging.
6. Connect the transformer to a power outlet. 7. Disconnect the transformer from the power outlet for extended periods of disuse. The product has no power switch and is always on as long as it is connected to the power supply. Maintenance and cleaning • The product is maintenance-free apart from occasional cleaning. • Disconnect the transformer from the power supply before cleaning and allow the LEDs to cool down sufficiently. • To clean, use a clean, dry, lint-free cloth.
Technical data a) Lightchain Item No. PLC-03-006 PLC-03-007 Protection type IP44 Operating voltage 31 V/DC* Power consumption Number of lights max. 3.6 W 50 Luminous colour 80 Warm White Power cable length Total length 5m approx. 12.35 m Distance between lights approx. 16.
