User manual

Please handle the product carefully. Jolts, impacts or a fall even
from a low height can damage the product.
The lights become hot during operation. Keep the product away
from highly combustible materials while operating.
The mains outlet must be located near to the device and be
easily accessible.
As power supply, only use the supplied transformer.
Only connect the transformer to a normal mains socket
connected to the public supply. Before plugging in the
transformer, check whether the voltage stated on the
transformer complies with the voltage of your electricity
supplier.
Never connect or disconnect transformers if your hands are
wet.
Never unplug the transformer from the mains socket by pulling
on the cable; always use the grips on the plug.
When setting up the product, make sure that the cable is not
pinched, kinked or damaged by sharp edges.
Always lay the cables so that nobody can trip over or become
entangled in them. This poses a risk of injury.
For safety reasons, disconnect the transformer from the mains
socket during storms.
This product is designed to be used indoors and outdoors.
Attention, LED light:
– Do not look directly into the LED light!
– Do not look into the beam directly or with optical instruments!