User manual

Product overview
1.8 cm
12 cm
4.2 cm
LED Remote Control
ON+ SL
OFF- FL
1
2
3
4
5
6
7
8
9
10
Remote control
1 IR transmitter
2 ON button
3 SL button
4 OFF button
5 FL button
6 Battery compartment
(backside)
7 - button
8 + button
9 IR receiver (not
depicted)
10 Seal (not depicted)
Operation
The product must not be used in or under water.
Do not operate the product if it is still in its packaging.
Do not hang any objects from the product and do not
cover the product.
The LEDs are not replaceable.
1. Remove the product from the packaging.
2. Hold the candle and turn the candle head anticlockwise to
open the battery compartment.
3. Insert one AA battery into the candle, ensuring that you
insert the negative pole (-) first. We recommend using high-
quality batteries.
4. Check that the seal (10) is in the correct position on the
screw cap of the candle head.
5. Turn the candle head clockwise as far as it will go to close the
battery compartment.
6. Ensure that the candle is in a secure position in the candle
holder.
7. Follow steps 2 to 5 to put all the other candles into operation.
8. Attach the candles, for example, to your Christmas tree.
Ensure stability when clamping the candles onto branches of
the tree.
9. Use the remote control to control the candles (see “Remote
control”).
10. Turn off the candles using the remote control and then
remove the batteries when not using the candles for a longer
period of time.
Replace the battery if the LED does not turn on.
Remote control
Pull the safety strip from the battery compartment (6) of the
remote control before first time use.
• Ensure that there are no objects between the IR transmitter (1)
and the candles.
• If the candles do not turn on at the same time, move closer to
the candles and ensure that the remote control is pointing in
the right direction.
• The operating range of the remote control depends on the
ambient conditions and the battery capacity.
• Replacing the battery is required when the operating range of
the remote control drops significantly or if the candles cannot
be operated when pressing any button.
• Remove the battery holder from the battery compartment (6)
as shown on the back of the remote control, and then remove
the old battery.
• Insert a coin cell battery of type CR2025 into the battery holder,
making sure the positive terminal (“+” marking on the battery)
faces up.
• Slide the battery holder back into the battery compartment
until it clicks into place.
Description of buttons
ON button (2)
Turn on candles / constant lighting
function
OFF button (4) Turn off candles
+ (8) / - button (7) Increases / decreases the brightness
SL (3) / FL button (5) Slow / fast flickering mode
Care and cleaning
• Turn off the product and let it cool down sufficiently before
cleaning. Remove the batteries before cleaning.
• Under no circumstances use aggressive cleaning agents,
cleaning alcohol or other chemical solutions, as the material can
be attacked as a result, or the function can even be impaired.
• To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water. Allow the product to dry
completely before continued use.
Technical data
a) Per candle
Protection type .................. IP44
Power supply ....................... 1 x 1.5 V battery, type AA
LED power ............................ 0.06 W
Luminous colour ................ Warm White
Operating conditions ...... -20 to +40 °C / 0 – 100 % RH
Storage conditions ........... -20 to +40 °C / 0 – 100 % RH
Weight .................................... 13 g
b) Remote control
Power supply ....................... 1 x 3 V lithium battery, type CR2025
Range ...................................... max. 5 m
Disposal
a) Product
Electronic devices are recyclable waste and must not
be placed in household waste. Always dispose of the
product according to the relevant statutory regulations.
Remove any inserted batteries and dispose of them
separately from the product.
b) Batteries
You as the end user are required by law (Battery
Ordinance) to return all used batteries. Disposing of
them in the household waste is prohibited.
Batteries that contain hazardous substances are labelled with
this symbol to indicate that disposal in household waste is
forbidden. The abbreviations for heavy metals in batteries are: Cd
= Cadmium, Hg = Mercury, Pb = Lead (indicated on the battery,
e.g. below the waste icon on the left).
Used batteries can be returned to local collection points, our
stores or battery retailers.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau 1678567_V3_1118_02_mxs_m_en
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method (e.g. photocopying, microfilming, or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. These operating
instructions reflect the current technical specifications at the time of printing.
© Copyright 2018 by CEI Conrad Electronic International (HK) Limited