User manual
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th oor, Tower 2,
Nina Tower, no. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method (e.g. photocopying, microlming or capture in electronic data processing systems) requires
prior written approval from the editor. Reprinting, also in part, is prohibited. The operating instructions reect the current
technical specications at time of print.
Copyright 2018 by CEI Conrad Electronic International (HK) Limited *1645721_25_v2_0318_02_hk_m_en
Function of the motion detector
The integrated PIR sensor (5) reacts to changes in temperature within the detection zone. For
example, this would happen when a person or animal whose temperature is different from the
ambient temperature enters the detection zone.
• In order to ensure optimal detection, the product should be placed so that the object to be
detected moves through the detection zone from left to right or vice versa, not towards to the
motion sensor. Bear this in mind when mounting the product.
• The range for detecting a change in temperature depends on numerous factors. Height,
ambient temperature, object size, distance, direction of movement, movement speed and the
temperature difference between the object and the surrounding area.
Due to the operating principle applied, it is not possible to detect temperature
changes through glass. Do not install the product behind a glass pane.
Important notes
• The power of the solar panel varies according to the time of year and depends on the duration
and strength of the sunlight. Long periods without sufcient solar radiation (especially in
winter) can lower the charge state of the battery, thus not allowing long lit periods. The
rechargeable battery stores less energy during the day than it consumes at night. Thus, the
lighting duration is inevitably reduced. This may damage the battery as a result of it becoming
completely discharged.
• Regularly charge the rechargeable battery with sunlight.
• Keep the product clean. Dust and dirt reduce the efciency of the solar module, resulting in
a lower charging current.
• Cold temperatures have a negative impact on the battery life (the light stays on for a shorter
period at night). To prolong the lifespan of the product, store it in a dry, warm room during the
winter (or when you are not going to use it for an extended period).
Care and cleaning
• Do not use abrasive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or stop the product from functioning properly.
• Do not point water jets (e.g. from a high-pressure cleaner) at the light, since this could
damage the gaskets.
• The product does not require maintenance except for occasional cleaning.
• Allow the product to cool down sufciently before cleaning.
• Use a clean, soft and dry cloth to clean the product. To remove stubborn dirt, moisten the
cloth slightly with lukewarm water.
• Do not press too hard on the housing as this can lead to scratch marks.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. Always dispose of the product according to the relevant statutory
regulations.
You thus full your statutory obligations and contribute to protection of the environment.
Technical data
Power supply ................................ 1 x 3.7 V, 2200 mAh Li-ion rechargeable battery
(type 18650)
Power consumption ...................... max. 3 W
Illuminant ...................................... 20 x LEDs
Light colour ................................... warm-white
LED life ......................................... 20 000 h
Operating time .............................. approx. 6 - 8 hours on a fully charged battery
PIR detection range ...................... max. 6 m
PIR detection angle ...................... 90°
Protection type .............................. IP44
Operating/storage conditions ........ -20 to +40 °C, 0 – 100 % RH
Dimensions
(W x H x D) ................................... 160 x 230 x 170 mm (Wall lamp Item no. 1645721)
(Ø x H) .......................................... 160 x 560 mm (Garden lamp Item no. 1645725)
Weight .......................................... approx. 810 g (Wall lamp Item no. 1645721)
approx. 1050 g (Garden lamp Item no. 1645725)
Distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau