User manual
b) Miscellaneous
•Consult an expert when in doubt about operation, safety or
connection of the device.
•Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
•If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Operation
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
The LEDs are non-dimmable and non-replaceable.
Observe the following assembly instruction:
1. Fold back the base (at an angle of 90°).
Insert the connection piece in the base.
Tighten the 3 screws at the base. (1)
2. Insert the crown in the connection piece.
Tighten the knurled screw. (2)
3. Connect the plug connector of the power supply to the
connection socket at the transformer.
4. Secure the connection by turning the screw cap of the plug
connector on the thread at the transformer.
Make sure that the seal at the coupling/plug connector is
provided. If the seal is damaged, the product may not be
used any longer in the outdoor area.
5. Connect the transformer to the power outlet.
6. The LEDs light up after plugging in.
7. To switch the product o, disconnect the transformer from
the power outlet.
The product has no power switch and is always on as long as
it is connected to the power supply.
The blossoms can be replaced if they are damaged. Carefully
pull o the faulty blossom and insert a new blossom on the
LED. (A)
Maintenance and cleaning
•The product is maintenance-free apart from occasional
cleaning.
•Disconnect the transformer from the power supply before
cleaning and allow the LEDs to cool down suciently.
•To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
•Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute
to the protection of the environment.
Technical data
a) Tree Light
Item No. PCA-03-003 PCA-03-005
Protection type IP44
Operating voltage
31 V/DC
Power consumption
4.81 W 0.915 W
Number of lights
380 100
Luminous colour
Cool White
Power cable length
5 m
Operating conditions
-20 to +70 °C / 10 – 90 % RH
Storage conditions
-20 to +70 °C / 10 – 90 % RH
Dimensions (H)
180 cm 120 cm
Weight
approx. 2.7 kg approx. 1.2 kg
b) Transformer
Protection type
IP44
Input voltage
100 - 240 V/AC, 50/60 Hz
Output voltage
31 V/DC
Output current
193 mA 116 mA
Output power
max. 6 W
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions
reflect the current technical specifications at time of print.
© Copyright 2015 by CEI Conrad Electronic International (HK) Limited
PCA-03-003-005_v2_0715_02_m_EN(1)
distributed by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau
5 m
180 m
1
2
A