User manual
Operation
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not operate the product if it is still in its packaging.
Lay the product out entirely before connecting it to the
power supply.
Do not hang any objects from the product and do not
cover the product.
The LEDs are neither dimmable nor replaceable.
1. Lay the product out entirely and arrange the cables so that
they lie freely and are not tangled.
2. Loosen the screw on the battery box with a small cross-head
screwdriver and remove the cover.
3. Insert new AA batteries. We recommend using high quality
batteries. Observe the correct polarity (“+” = positive, “-“ =
negative), as stated on the battery box.
4. Reattach the cover and retighten the screw.
5. You can switch the product on/o by the on/o switch on
the battery box (ON = on, OFF = o).
6. Model PBA-01-002 and Model PBA-01-003:
After having switched on the product, it will be lit for 6 hours.
Then it will be switched o for 18 hours, etc.
7. Model PBA-01-001:
The switch for setting the after-run time is located in the
battery box.
Switch position “6H”: The lightchain glows for 6 hours. Then
it is switched o for 18 hours. This interval will be repeated if
the On/O switch is in the ON position.
Switch position “9H”:
The lightchain glows for 9 hours. Then it is switched o for
15hours. This interval will be repeated if the On/O switch is
in the ON position.
8. Mount the product in a suitable place (i.e. wall, tree or bush).
Where necessary use plastic cable ties to secure the product.
9. Switch the product o and remove the batteries from the
battery box, if you are not using the product for a longer
period of time.
A change of batteries is necessary if the LEDs of the light
chain are no longer coming on.
Maintenance and cleaning
• The product is maintenance-free, except for any change of
batteries and occasional cleaning.
• Switch the product o before cleaning and let the LEDs cool
down suciently.
• To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water. Allow the product to dry
completely before continued use.
Disposal
a) Product
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
Remove any inserted batteries and dispose of them
separately from the product.
b) Batteries
You as the end user are required by law (Battery
Ordinance) to return all used batteries. Disposing of
them in the household waste is prohibited.
Contaminated batteries are labelled with this symbol to indicate
that disposal in the domestic waste is forbidden. The designations
for the heavy metals involved are: Cd = Cadmium, Hg = Mercury,
Pb = Lead (name on batteries, e.g. below the trash icon on the
left).
Used batteries can be returned to collection points in your
municipality, our stores or wherever batteries are sold.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
Technical data
Item No. PBA-01-001 PBA-01-002
Protection type IP44
Operating voltage 3 x 1.5 V/DC batteries, type AA
Power consumption max. 0.18 W max. 0.36 W
Battery life approx. 60 h
Number of lights 40 80
Luminous colour Warm White
Power cable length 0.5 m
Total length approx. 4.4 m approx. 8.4 m
Distance between lights 10 cm
Operating conditions -20 to +60 °C / 20 – 80 % RH
Storage conditions -20 to +60 °C / 20 – 80 % RH
Weight approx. 115 g approx. 195 g
Item No. PBA-01-003
Protection type IP44
Operating voltage 3 x 1.5 V/DC batteries, type AA
Power consumption max. 0.18 W
Battery life approx. 60 h
Number of lights 40
Luminous colour Red/Amber/Green/Blue
Power cable length 0.5 m
Total length approx. 4.4 m
Distance between lights 10 cm
Operating conditions -20 to +60 °C / 20 – 80 % RH
Storage conditions -20 to +60 °C / 20 – 80 % RH
Weight approx. 115 g
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions
reflect the current technical specifications at time of print.
© Copyright 2014 by CEI Conrad Electronic International (HK) Limited
PBA-01-001-002-003_v2_1114_02_m_EN
distributed by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau