User manual

b) Miscellaneous
•Consult an expert when in doubt about operation, safety or
connection of the device.
•Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
•If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Product overview
Operation
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
The LEDs are non-dimmable and non-replaceable.
1. Lay the product out entirely and arrange the cables so that
they lie freely and are not tangled.
2. Attach the product to a suitable mounting site (e.g. a piece
of furniture). Where necessary use plastic cable ties to secure
the product.
3. Connect the plug to the connector on the transformer. It is
only possible to connect in one way.
4. Secure the connection by turning the plug‘s screw cap onto
the transformer‘s thread.
5. Connect the transformer to a power outlet.
6. Repeatedly press the button on the transformer to select one
of the 9 lighting eects.
7. Disconnect the transformer from the power outlet for
extended periods of disuse.
The product has no power switch and is always on as long as
it is connected to the power supply.
Maintenance and cleaning
•The product is maintenance-free apart from occasional
cleaning.
•Disconnect the transformer from the power supply before
cleaning and allow the LEDs to cool down suciently.
•To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
•Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute
to the protection of the environment.
Technical data
a) Light chain
Item No. LLC-08-001 LLC-08-002 LLC-08-003
Protection type IP20
Operating voltage 31 V/DC
Power consumption max. 6 W
Number of lights 80 120 40
Luminous colour Warm white/ Cool white
Power cable length 5 m
Total length 12.9 m 16.9 m 8.9 m
Distance between
lights
10 cm
Operating conditions -20 to +70 °C / 0 – 90 % RH
Storage conditions -20 to +70 °C / 0 – 90 % RH
Weight 251 g 345 g 155 g
b) Transformer
Input voltage 220 - 240 V/AC, 50/60 Hz
Output voltage 31 V/DC
Output current 194 mA
Output power max. 6 W
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. The operating instructions
reflect the current technical specifications at time of print.
© Copyright 2015 by CEI Conrad Electronic International (HK) Limited
LLC-08-001-002-003_v1_0615_02_m_EN(1)
distributed by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau
12.9 m
0.5 m
10 cm
16.9 m
0.5 m
10 cm
8.9 m
0.5 m
10 cm
LLC-08-001
LLC-08-002
LLC-08-003