User manual

b) Miscellaneous
•Consult an expert when in doubt about operation, safety or
connection of the device.
•Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
•If you have questions which remain unanswered by these
operating instructions, contact our technical support service or
other technical personnel.
Product overview
9.5 m
30 cm
5 m
Operation
Do not set up or operate the product under water.
Make sure that the cables hang loosely and are not
stretched too tightly. Failure to heed this warning may
cause the cables to tear.
Do not connect the product to the power supply while
it is still in the packaging. Lay the product out entirely
before connecting it to the power supply.
Do not hang any objects from the product and do not
cover the product.
The LEDs are neither dimmable nor replaceable.
1. Lay the product out entirely and arrange the cables so that
they lie freely and are not tangled.
2. Attach the product to a suitable mounting site (e.g. a piece
of furniture). Where necessary use plastic cable ties to secure
the product.
3. Connect the plug to the correct connector on the
transformer. It is only possible to connect in one way.
4. Connect the transformer to a power outlet.
5. Disconnect the transformer from the power outlet for
extended periods of disuse.
The product has no power switch and is always on as long as
it is connected to the power supply.
Maintenance and cleaning
•The product is maintenance-free apart from occasional
cleaning.
•Disconnect the transformer from the power supply before
cleaning and allow the LEDs to cool down suciently.
•To clean, use a clean, dry, lint-free cloth. For stubborn dirt,
slightly dampen the cloth with water.
•Allow the product to dry completely before continued use.
Disposal
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of
its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and
contribute to the protection of the environment.
Technical data
a) Light chain
Operating voltage ................................. 24 V/DC
Power consumption .............................0.6 W
Number of lights ....................................16
Luminous colour ....................................Warm White
Power cable length ..............................5 m
Total length ..............................................approx. 9.5 m
Distance between lights ....................30 cm
Operating conditions ..........................-20 to +70 °C / 20 – 80% RH
Storage conditions ...............................-20 to +70 °C / 20 – 80% RH
Weight ........................................................320 g
b) Transformer
Input voltage ...........................................100 – 240 V/AC, 50/60 Hz
Output voltage .......................................24 V/DC
Output current .......................................130 mA
Output power .........................................max. 3 W
These operating instructions are published by CEI Conrad Electronic International (HK) Limited,
18th Floor, Tower 2, Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong.
All rights including translation reserved. Reproduction by any method, e.g. photocopy,
microfilming, or the capture in electronic data processing systems require the prior written
approval by the editor. Reprinting, also in part, is prohibited. The operating instructions reflect
the current technical specifications at time of print. We reserve the right to change the technical
or physical specifications.
© Copyright 2014 by CEI Conrad Electronic International (HK) Limited
www.polarlite.com
V1_0414_02_KV