Instructions

Product overview
8.2 cm
13 cm
Operation
The product must not be used in or under water.
Do not operate the product if it is still in its packaging.
Do not hang any objects from the product and do not
cover the product.
Do not place the product near sources of heat such as
chimneys or stoves.
The LED is non-dimmable and non-replaceable.
1. Remove the product from the packaging. Remove the
protective film.
2. Place the product on a dry, horizontal surface, e.g. a table,
window ledge, etc.
3. Remove the battery compartment cover.
4. Insert two new AA-batteries. We recommend using high
quality batteries. Observe the correct polarity (“+” = positive,
“-“ = negative), as stated inside the battery compartment.
5. Insert the battery compartment cover.
6. Turn the product on or o using the switch at the bottom of
the product (On = On, O = O).
7. The product features a timer. After you turn the product
on, it will stay on for approx. 5 hours and then switch o
automatically. The product will turn on again 19 hours later.
Example: Slide the on/o switch to the Timer position at
3pm. The product will stay on from 3pm to 8pm and then
switch o automatically. It will turn itself on again at 3pm on
the following day. This interval will be repeated provided that
the on/o switch is in the Timer position and the batteries
are not empty.
8. Turn o the product and remove the batteries for extended
periods of disuse.
Replacing the batteries
Replace the batteries when the LED no longer lights up.
• Make sure that the on/o switch is O before opening the
battery compartment.
• Remove the battery compartment cover.
• Remove the exhausted batteries.
• Insert two new AA-batteries. We recommend using high quality
batteries. Observe the correct polarity (“+” = positive, “-“ =
negative), as stated inside the battery compartment.
• Close the battery compartment. Make sure the cover clicks
audibly into place.
Care and cleaning
• Turn o the product and let it cool down suciently before
cleaning.
• Remove the batteries before cleaning.
• Under no circumstances use aggressive cleaning agents,
cleaning alcohol or other chemical solutions, as the material can
be attacked as a result, or the function can even be impaired.
• Use a dry, lint-free cloth to clean the product. Do not pinch the
real wax too hard, as this can lead to scratch marks.
Disposal
a) Product
Electronic devices are recyclable waste and must not
be disposed of in the household waste. At the end of its
service life, dispose of the product according to the
relevant statutory regulations.
Remove any inserted batteries and dispose of them
separately from the product.
b) Batteries
You as the end user are required by law (Battery
Ordinance) to return all used batteries. Disposing of
them in the household waste is prohibited.
Contaminated batteries are labelled with this symbol
to indicate that disposal in the domestic waste is forbidden. The
designations for the heavy metals involved are: Cd = Cadmium,
Hg = Mercury, Pb = Lead (name on batteries, e.g. below the trash
icon on the left).
Used batteries can be returned to collection points in your
municipality, our stores or wherever batteries are sold.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
Technical data
Item No. 1556116 1566117
Operating voltage 3 V (2 x 1.5 V batteries, type AA)
Power consumption 0.06 W
Number of lights 1
Luminous colour Warm White
Operating conditions -5 to +40 °C / 0 – 85 % RH
Storage conditions -5 to +40 °C / 0 – 85 % RH
Dimensions (H x Ø) 130 x 82 mm
Weight 241 g
These operating instructions are published by CEI Conrad Electronic International (HK) Limited, 18th Floor, Tower 2,
Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, New Territories, Hong Kong. All rights including translation reserved.
Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited. These operating instructions
represent the technical status at the time of printing.
© Copyright 2017 by CEI Conrad Electronic International (HK) Limited
1556116_7_V2_0717_02_LS_m_EN
distributed by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau