Owner's manual

MAINTENANCE

Vehicle Immersion

NOTICE: If your vehicle becomes immersed, major engine damage can result if

the machine is not thoroughly inspected. Take the vehicle to your

dealer before starting the engine.

If it’s impossible to take your vehicle to a dealer before starting it,

follow the steps outlined below.

1. Move the vehicle to dry land.

2. Check the air box. If water is present, dry the air box and replace the

filter with a new filter. Thoroughly dry the air pre-filter. See page

67.

3. Remove the air box drain plug to drain any water. Reinstall the drain

plug securely.

4. Remove the spark plug.

5. Turn the engine over several times using the electric start.

6. Dry the spark plug and reinstall it, or install a new plug.

7. Attempt to start the engine. If necessary, repeat the drying

procedure.

8. Take the vehicle to your dealer for service as soon as possible,

whether you succeed in starting it or not.

9. If water has been ingested into the transmission follow the

procedure on page 66 for drying.