Owner's manual

BLUETOOTH OPERATION (IF EQUIPPED)

The Bluetooth Classic functionality allows users to pair their phones with the

vehicle’s digital gauge. This function allows users to receive call and text alerts

while operating the vehicle.

PAIRING YOUR PHONE TO THE DIGITAL GAUGE

Use the following procedure to pair your phone with the vehicle’s digital gauge.

NOTE

Bluetooth functionality is compatible with both iOS and Android phones. For

iOS phones, you must go to the Settings option and enable notifications. Most

Android phones will prompt the user automatically to enable notifications as

part of the pairing process.

1. Make sure Bluetooth is enabled on

your phone.

2. Access the options menu on the

vehicle’s digital gauge and select BT

PAIR. The Bluetooth icon

will

begin to blink.

3. Find and select Polaris Gauge on

your phone’s Bluetooth menu or

prompt. Pairing should occur

momentarily. Pairing mode will

continue for up to 90 seconds or if

you exit the BT PAIR menu.

After successfully pairing the phone,

the vehicle’s digital gauge will

automatically reconnect with the

phone each time it is powered on and

within range. No further action is

required by the user at this point.

NOTE

Once the digital gauge is powered off, Bluetooth connectivity will cease. Also,

when a new phone is paired with the digital gauge, all missed call and text

information from the previous phone will be erased. Up to 16 different phone

pairings can be saved to the digital gauge. The digital gauge does not support

systems below Android version 4.2 and iOS version 8.4.

FEATURES AND CONTROLS