Owner's manual

Press this switch with your left forefinger to activate the headlight high beam.

The lights will return to low beam when the switch is released.

WINCH SWITCH

See the Winch Guide chapter of your owner’s manual for winch information.

MODE / REVERSE OVERRIDE SWITCH

This vehicle is equipped with a reverse speed limiter system. To gain additional

wheel speed while backing, release the throttle and depress the override switch.

WARNING

Pressing the override switch while the throttle is open can cause loss of

control, which may result in serious injury or death. Always release the throttle

before pressing the override switch.

The reverse override switch also acts as a MODE button when held down for

approximately one half second. The transmission cannot be in reverse when

using the override switch as a MODE button.

MAIN KEY SWITCH

WARNING

Do not attach a large key fob or key ring to the main switch. It may contact the

gas tank cap when turning, causing an interruption to the electrical system and

an unexpected engine shut-down during operation. This could result in serious

injury or death.

End all electrical power to the vehicle

The LIGHTS ON position turns the headlights on. The engine

stop switch must be in the RUN position.

Start the engine. The headlights are not on in this position.

After starting the engine, release the key switch to the

PARKING LIGHTS ON position. The parking lights and

taillights are on in this position.

FEATURES AND CONTROLS