Industries Automobile User Manual

MAINTENANCE AND LUBRICATIO N

Engine Oil

Oil an d F ilter Change (TM)

1. Position the vehicle on a level surface.

2. Run the engine two to three minutes until

warm, then s top the engine.

3. Clean the area around the drain plug (6) at the bottom of the

engine. The plug is accessible through the access hole in the

bottom of the skid plate.

CAUTION

Hot oil can cause serious burns. Do not allow hot oil to come into

contact with skin.

4. Place a drain pan beneath the engine and remove the drain plug.

Allow the oil to drain completely.

5. Replace the sealing washer on the drain plug.

NOTE: The sealing surfaces on the drain plug and crankcase should

be clean and free of burrs, nicks or scratches.

6. Reinstall the drain plug and torque to 14 ft. lbs. (19 Nm).