Owner's manual

ITEM REMARKS PAGE

Cab Doors (if equipped) Check doors and latches for wear or damage. -

Grass and leaves Remove grass, leaves, and other flammable

material or debris, especially near the exhaust

system.

STARTING THE ENGINE

1. Position the vehicle on a level surface outdoors or in a well-ventilated area.

2. Sit in the driver's seat and fasten the seat belt. Always make sure all cab

doors are closed and latched when riding in this vehicle.

3. Place the transmission in PARK or NEUTRAL.

4. Engage the park brake.

5. Apply the brakes. Do not press the throttle pedal while starting the engine.

6. Turn the ignition key to the START position. Engage the starter for a

maximum of five seconds. Release the key when the engine starts. Turn the

key to either LIGHTS ON or POSITION LIGHTS ON.

OFF

LIGHTS ON

POSITION LIGHTS ON

START

7. If the engine does not start within five seconds, return the ignition switch to

the OFF position and wait five seconds. Repeat steps 6 and 7 until the

engine starts.

8. Vary the engine RPM slightly with the throttle to aid in warm up until the

engine idles smoothly.

NOTICE

Operating the vehicle immediately after starting could cause engine damage.

Allow the engine to warm up for several minutes before operating the vehicle.

OPERATION