Owner's manual

PARK BRAKE LEVER

Always apply the service brakes

before engaging or releasing the

park brake. To help prevent the

vehicle from rolling, set the park

brake when parking the vehicle.

When the park brake is set and the

park brake indicator is illuminated,

engine speed is limited. If the

accelerator is applied, this limiting

feature prevents operation, which

protects the park brake pads from

excessive wear.

TIP

This feature will not operate properly if the park brake connector or switch

(under the hood) malfunctions or becomes disconnected, or if the switch has

moved. Check for disconnection, then see your dealer or other qualified

service person promptly if this feature fails to operate properly.

1. To set the park brake, apply the brakes. Pull the park brake lever

towards

yourself as far as possible.

2. To release the park brake, apply the brakes. Turn the park brake lever

counterclockwise and push it in as far as possible.

SEAT

SEAT REMOVAL

To remove the driver’s seat, lift up on the rear of the seat and rotate the seat

base up and forward.

To put the passenger seat into the upright position, lift up on the front of the seat

and raise it to the upright position.

FEATURES AND CONTROLS