Owner's manual

BRAKE LIGHTS

When the brake pedal is depressed, the brake light comes on. Check the brake

light before each ride.

To check the brake lights, do the following:

1. Turn the key to the ON position.

2. Depress the brake pedal. The brake light should come on after about 10mm

(0.4 in.) of pedal travel. If the light doesn't come on, check the bulb.

INDICATOR LAMP REPLACEMENT

To replace the indicator lamp, do the following:

1. Lift the hood.

2. Reach in behind the console panel and lift the release to unplug the light

from the harness.

3. Using a flathead screwdriver, press on the tab on the top of the light to

remove the indicator light assembly from the console panel.

4. Locate the expired lamp. Using a screwdriver, rotate the lamp 1/4 turn

counter-clockwise.

5. Grip the lamp with a needle-nose pliers and remove it from the assembly.

6. Install the new lamp. Using a screwdriver, rotate the lamp 1/4 turn clockwise

to seat it.

7. Snap the assembly back into the console panel. Reconnect the harness.

8. Close the hood.

MAINTENANCE