Owner's manual

LIGHTS

Poor lighting can result in reduced visibility when driving. Headlight and taillight

lenses become dirty during normal operation. Clean lights frequently and

replace burned out lamps promptly. Do not operate this vehicle at night or in low

light conditions until the headlight is replaced. Always make sure lights are

adjusted properly for best visibility.

When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from

your skin leaves a residue, causing a hot spot that will shorten the life of the

lamp.

HEADLIGHT LAMP REPLACEMENT

To replace the headlights, do the following:

1. Open the hood.

CAUTION

Hot components can cause burns to skin. Allow lamps to cool before servicing.

2. Unplug the headlamp from the wiring harness

. Be sure to pull on the

connector, not on the wiring.

3. Turn the lamp counter-clockwise to remove it.

4. Install the new lamp.

TIP

Make sure the tab on the lamp locates properly in the housing.

MAINTENANCE