Owner's manual

BRAKE SYSTEM BREAK-IN
Apply only moderate braking force for the first 50 stops. Aggressive or overly
forceful braking when the brake system is new could damage brake pads and
rotors.
PVT BREAK-IN (CLUTCHES/BELT)
A proper break-in of the clutches and drive belt will ensure a longer life and
better performance. Break in the clutches and belt by operating at slower
speeds during the break-in period as recommended. Pull only light loads. Avoid
aggressive acceleration and high speed operation during the break-in period.
If a belt fails, always clean any debris from the PVT intake and outlet duct and
from the clutch and engine compartments when replacing the belt.
PRE-RIDE INSPECTION
Failure to inspect and verify that the vehicle is in safe operating condition before
operating increases the risk of an accident. Always inspect the vehicle before
each use to make sure it's in safe operating condition.
ITEM REMARKS PAGE
Brake system/pedal travel Ensure proper operation page 43
page 99
Brake fluid Ensure proper level page 99
Front suspension Inspect, lubricate if necessary page 85
Rear suspension Inspect, lubricate if necessary page 85
Steering Ensure free operation
-
Tires Inspect condition and pressure page 102
Wheels/fasteners Inspect, ensure fastener tightness page 102
Frame nuts, bolts,
fasteners
Inspect, ensure tightness
-
Fuel and oil Ensure proper levels page 85
Coolant level Ensure proper level page 92
Coolant hoses Inspect for leaks
-
Throttle Ensure proper operation page 43
Indicator lights/switches Ensure proper operation page 31
page 39
Intake pre-filters Inspect, clean
-
50
OPERATION