Owner's Manual



When you connect the control box and power on the
cleaner, the operating time for the current selected
cycle is displayed. The default cleaning surface setting
for the 9400 4WD / P94 4WD is Bottom Surface
. To change the current programmed cycle, see
Section 5. Programming the Cleaner.

Use
to change cleaning surface setting.
Toggle between: BOTTOM ONLY
BOTTOM AND SIDES

 

After selecting the cleaning surface, press to begin
operation.
The screen displays the time remaining for the selected
cycle. For example, 0:44 on the display indicates that
cleaning will be completed in 44 minutes.
 




 














