Owner's Manual

Page 17

9300xi Sport Only

Symptom Cause Solution

The remote control does not

work.

The batteries are dead and need to

be replaced.

Replace the batteries in the remote control.

The remote control is not

synchronized to the control unit.

Synchronizing procedure:

When replacing the control unit or the remote con-

trol, it is necessary to synchronise the new remote

control with the control unit:

1. Connect the 9300xi sport to the control unit,

then plug the control unit to the receptacle.

2. Press OFF + Cycle I buttons for more

than 6 seconds until both lights

ﬂ ash once:

3. Press and hold the "rotate right" button on the

remote control unit.

4. The light on the right will ﬂ ash

5 times

then both

lights will ﬂ ash together.

5. The synchronization procedure is completed

when both lights switch off.

English